Changing The Settings; Changing The Language; Changing The Units Of Measure; Changing The Screen Brightness - Dymo XTL 300 User Manual

Changing the Settings

You can change the following settings:
 Changing the Language
 Changing the Units of Measure
 Changing the Screen Brightness
 Changing the Auto Shut-off Time
 Changing Recall Data Setting
 Setting Print Options
 Setting the Default Barcode
All settings remain in effect until you change them again.
You can also restore certain factory settings:
 Restoring the Label Application Default Settings
 Restoring Factory Default Settings

Changing the Language

Changing the language setting only affects the text and menus in the display.
To change the language
From the Home screen, select
1
Select a language and select Done.
2
The language is changed immediately.

Changing the Units of Measure

You can choose to work in millimeters or inches. The default units of measure is
inches.
To change the units of measure
From the Home screen, select
1
Select the Inches or mm and select Done.
2

Changing the Screen Brightness

You can change the brightness of the LCD display to accommodate different
lighting situations.
To change the brightness
From the Home screen, select
1
Use the and
2
Done.
®
33 XTL 300
User Guide
and select Language.
and select Units of measure.
and select Screen brightness.
keys to select the brightness level you prefer and select