Web Configuration Menu; Running The Quick Setup Wizard; Connecting To A Wireless Network - Dymo LabelWriter User Manual

Web Configuration Menu

To access the Web Configuration menu, click
page in the Web Configuration utility. From the menu, you can:
 Run the Quick Setup wizard to connect to a wireless network.
 View the Status of the printer
 Change the Printer Name
 Select a new Wireless Connection
 Configure the printer's Access Point
 Configure a static Wireless connection
 Change the Password
 Change the Language
 Set the session Timeout
 Restart the printer

Running the Quick Setup Wizard

The first time you connect to the LabelWriter Wireless printer, a Quick Setup
wizard guides you through the connection process. You can re-run this Quick
Setup wizard at any time from the
You can also skip the Quick Setup wizard and configure the printer for a network
manually from the

Connecting to a Wireless Network

The Web Configuration utility allows you more options for connecting the printer to
a wireless network, such as accessing a hidden network or a more advanced
configuration.
The wireless security methods supported are:
 Open
 WEP
 WPA/WPA2 - Personal Mixed
 WPA2 - Personal
 WPA/WPA2 - Enterprise Mixed
 WPA2 - Enterprise
X.509 certificates in PEM and DER formats are supported. PFX certificates must
be converted to PEM/DER.
The information in this section assumes that you have the network name,
authentication, and other network details available. If you don't have this
information, contact your network system administrator.
To connect the printer to a visible wireless network
Log in to the Web Configuration utility.
1
See Accessing the Web Configuration Utility on page 15.
From the menu, click Wireless connection.
2
16 DYMO LabelWriter Wireless
User Guide
menu to connect to a different network.
menu. See Connecting to a Wireless Network.
in the upper left corner of any