My Button; Features - Universal Remote Control URC-SR3 Owner's Manual

My Button

Automatically turn on TV to your favorite channel.
Always begin watching TV on thechannel you
like best - you can preset thisbutton with a few
simple steps. In cablemode, MY BUTTON will
automatically turnthe TV to your favorite channel.
To activatethis feature:
STEP 1: Press the CBL button to select the
Cable mode.
STEP 2: Press the green My BUTTON and the
SELECT [SEL] button at the same time for 2
seconds until the CBL component light turns on.
STEP 3: Using the Number Pad, punch in the
Channel number of the channel that you want to
store on the My BUTTON. The Cable Component
light will blink once for each button pressed.
STEP 4: Press the CHANNEL UP button to store
the commands entered. The CBL component LED
will blink three times to confirm the programming.
NOTE: If you don't have a cable box and work
just with your TV , Press the TV button in step one
instead of CBL.
Make it more advanced
If you really want to get fancy, you can add
"power on" capabilities to the My Button, and
use it to turn on the TV and Cable at the same
time, and tune to your favorite station.
STEP 1: Press the green "My Button" and the
Select button at the same time for 2 seconds
until the CBL Component light turns on.
STEP 2: Press CBL, then press POWER ON
STEP 3: Press TV, then Press POWER ON
STEP 4: Press CBL, then using the number
pad, punch in the Channel number of the
channel that you want to store on the My
BUTTON. The Cable Component light will
blink once for each button pressed.
STEP 5: Press the CHANNEL UP button to store
the commands entered. The CBL component
LED will blink three times to confirm the
programming.
NOTE: If your TV is not connected to cable,
skip step two, and press TV instead of CBL in
step four.
Page | 21