Introduction This remote control is designed to operate most Digital and Analog Cable Boxes, as well as TVs, and a VCR or DVD player. Replacing Batteries Before you program or operate the remote control, you must install two new AAA alkaline batteries. STEP1 Remove the battery compartment cover from the back of your remote control.
Button Functions Programming the Remote Control. *Note : In this section, when you are instructed to press a [DEVICE] button, that means you should press either the CBL, TV, or DVD button, depending on which device you are programming the remote to operate. A.
Page 5
STEP1 Turn on the equipment that you want the remote control to operate Cable Box, TV and DVD(VCR). STEP2 Press the [DEVICE] button and the [OK/SEL] button simultaneously for three seconds. The corresponding device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds.
Page 6
STEP2 Press the [DEVICE] button and the [OK/SEL] button simultaneously for three seconds. The device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 20 seconds. The next step must be entered while the LED is on.
Page 7
simultaneously for 3 seconds. The DVD LED will turn on for 20 seconds. The next step must be performed while the LED is on. STEP2 Press the [TV] button. STEP3 Point the remote control toward the TV and enter the three-digit code for your TV from the TV codes table.
Page 8
To access the programmed channels, press the [MACRO] button once. This will bring up the first channel. Press once again and it will bring up the second channel. Press again and it will bring up the third channel. To erase the Macro programming and return to the original function: STEP1 Press the [CBL] button to select the CABLE mode.
Page 9
Assigning the Channel keys to a Assigning the Channel keys to a ent Device ent Device By default, the CH+, CH-, NUMERIC and LAST keys operate through your Cable Box. If you would like those keys to operate those functions on a different device, follow these steps.
Page 10
Set-up Code Tables CABLE TV CONVERTER CODE No MAKER(BRAND) NAME SCIENTIFIC ATLANTA EXPLORER Series 8600X 8600 8540,8570,8590 8500 IPN Series MOTOROLA DCT Series (DVR Model) VIP Series GENERAL INSTRUMENT DCT Series,DCH Series, CFT2200 JERROLD BMC9012/BMC9022 DSR470 CFT2000 DL4,DP(V),DQN(V),DPBB Some Model ADB Series 054 055 ADB5810WX...
Page 11
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST ADMIRAL 072 081 160 161 096 ADVENT AIWA 141 145 AKAI 070 146 004 148 124 226 104 108 AKIO ALARON AMARK 112 127 AMERICA ACTION 043 AMPRO 073 167 ANAM 043 054 056 080 112 131 058 070 004 112 APEX DIGITAL 015 150 037...