J640 Operator's Handbook
Communication Values –––––––––––––––––––––––––––––––––––––
In order for your printer to communicate with your host, you
must make sure the communication values are set to the same
values. Here are the default values with which the printer is
shipped:
These are not field-changeable in the printer.
If you have any questions regarding your printer, contact our
National Diagnostic Center at 1-800-537-2488.
1-4
Baud:
9600
Word Length:
8-bit data frame
Stop Bits:
1-stop bit
Parity:
none
Flow Control:
DTR