Operation; To Make Calls; To Receive Voice Calls - Norelco ULTRASWITCH 100 User Manual

T o use your own communication devices such as phone, fax machine or
modem, you simply operate each device as if it were connected directly to the
Ultra Switch 100. In other words, you can make a call from any device
following the normal procedure for outward dialing.
W hen you attempt to make a call from a device (such as phone) and the line
is currently being occupied by another device (such as fax machine), the
Ultra Switch 100 will generate a busy tone to remind you that the line is not
available for the time being. This "Barge-In Protection" facilitates
protection of any voice or fax/data call from being intervened by other
telephone equipment connected to the Ultra Switch 100.
If an attempt to make a call via phone port is rejected due to the
unavailability of the C/O line described above, the Ultra Switch 100 will
inform you when the line is available. Indeed, after the line is released, the
Ultra Switch 100 will ring the phone connected to the Ultra Switch 100 one
time to advise that the line is now available for communication.
1: Pick up any phone which is ringing.
: 2
Case 1
- If the phone is connected directly on the Ultra Switch 100 and the
caller is on the line and the line is clear - start conversation.
Case 2
-If the phone is connected directly on the Ultra Switch 100 and the
caller is on the line but the ring-back tone is heard - press *0 to stop
the ring-back tone, and then talk to the caller. If you need to ring the
phone connected behind the Ultra Switch 100 again, press *1 ; if
you want to ring the fax machine (or the modem connected to the
Ultra Switch 100 , press the Fax (or Modem) Access Code.

2. OPERATION

To make calls

To receive voice calls

5