Norelco ULTRASWITCH 100 User Manual page 13

1: Type your phone number
2: After the phone number, t
3: Press the Enter key
The calling computer's m
immediately after dialing.
■
Modem Switching by Modem Access Code
There is an alternative for your Ultra Switch 100 to route a modem call to
the modem port. This allows computer connection via the modems that
do not support reverse modem communication. This approach requires
the Modem Access Code to instruct the Ultra Switch 100 that a computer
communication is requested. The Ultra Switch 100, after receiving the
Modem Access Code (default code: 22, page 17), routes the line to the
modem port through which the calling and the receiving modems are
connected for computer communication.
T he Modem Access Code can be entered locally or remotely, both
requires the code to be entered after the call is answered by the Ultra
Switch 100.
◆
To Enter the Modem Access Code Remotely
In struct the caller to follow the steps listed below to access your
computer:
1 :Type your phone number.
ype the letter "R"
odem generates reverse modem tone
10