Norelco ULTRASWITCH 100 User Manual page 23

Function
Code
Cal
8
◆
1: Turn on Fax Filter
2: Turn on Modem Filter
3: Turn on Phone Filt
4: Turn on TAD-to-Fax
5: Turn off all the Call Filter modes
Example:
The Ultra Switch 100
line to the fax machine after the
answe
Note:
1.
2.
3. TAD-to-Fax is useful when the caller cannot enter a tone
4.
Description
l Filter
Additional Programming
(refer to page 21, Secu
# * 8 4 *
ring machine ends its operation.
More than one Call Filter may be enabled simultaneously.
When the Fax Filter (Modem Filter) is switched on, the
Ultra Switch 100 will disconnect the C/O line
immediately if the CNG tone (reverse modem tone) is
detected.
code to direct the Ultra Switch 100 to transfer the call to
the fax machine. In this case, you may pre-record an
outgoing messa
the caller not to hang up the phone if he/she wishes to
send a fax. The Ultra Switch 100 will route the line to the
fax machine after the a
operation.
Fax Filter overrides TAD-to-Fax. Namely, only Fax Filter
is effective when both Fax Filter and TAD-to-Fax are
switched on.
:
rity Code)
er
will switch the
ge in your answering machine to remind
nswering machine ends its
20
Default R ange of
Parameter
5 N / A