Norelco ULTRASWITCH 100 User Manual page 11

◆ Manual Switching Remotely
Instruct the caller to enter the
answered by the Ultra Switch 100. The Ultra Switch 100 will route
the line to the fax port after it receives the correct code.
The remote switching can only be conducted through a tone-dial
Note: . 1
(DTMF) telephone.
The Ultra Switch
2 .
Answer" rings when operating in the Regular Switch mode,
answer the call after "Rings to Answer" plus one rings when
operating in the Caller ID mode or the Dis-tinctive Ringing
mode.
■
TAD-to-Fax Switching
When this TAD-to-Fax mode is activated, the Ultra Switch 100 will route
the line to the fax port after the answering machine (connected behind the
Ultra Switch 100) completes its operation ( i.e., answers the line, plays
the pre-recorded outgoing message, and records incoming voice message,
etc. ). Please refer to page 20 to enable this mode.
The TAD-to-Fax switching is useful to facilitate fax transmission from a
pulse-dial fax machine by which Fax Access Code can not be entered to
instruct the Ultra Switch 100 for fax switching. When this mode is on,
you may record the outgoing message to remind the fax caller to stay on
the line until the fax tone is heard.
Fax Access Code after the line is
100 will answer the call after "Rings to
8