Norelco ULTRASWITCH 100 User Manual page 22

Function
Code
7 Declaration of Device Availability
◆
0: Fax or modem disabled
1: Fax is disabled
2: Modem is disabled
3: Fax and modem enabled
4: Caller ID with ringing
5: Caller ID without ringing
6: Caller ID disabled
7: Distinctive Ringing Mode enabled
8: Distinctive Ringing Mode disabled
Example:
The
100 is not being used.
Note:
1. The Ultra Switch 100 will disconnect the line
2.
3.
Description
Additional Programming:
(refer to page 12
and pa ge 17, Fax
Access Code)
# * 7 2 *
mo dem port of the Ultra Switch
immediately if
device. However, it is not necessary
In this case, the Ultra Switch 100 wil
port not in use if the access code or
(either CNG tone or reverse modem
that port is detected.
When the Caller ID with ringi
Ultra Switch 100 will let the first two rings pass through
the phone port so that calle
by th e display.
Some phones do not require to be waken-up with a ring to
record Called ID. In this case, the Caller ID without
ringing should be enabled.
, "Distinctive Ringing"
Access Code and Modem
the call attempts to link to a disabled
r information can be recorded
19
D fau e lt
3 , 6
and 8
to disable a device.
l route a call to the
identification tone
tone) associated to
ng has been enabled, the
Range of
Parameter
N / A