Adjusting Egg Switch; Adjusting Swing-Away Mechanism - Invacare TDX SP2 User Manual

Invacare® TDX® SP2 Series
1. Loosen hand screw A.
2. Turn underpart of joystick to position slot.
3. Adjust joystick orientation. If desired, lock joystick in 90
degree angle in slot.
4. Tighten hand screw.
Adjusting Depth and Height
Refer to 5.5 Adjusting Swing-Away Mechanism, page 36.

5.4.2 Adjusting Egg Switch

Adjusting Switch Orientation
The egg switch can be turned through 360 degrees.
• 7/16" (11.2 mm) wrench
36
1. Loosen nut A.
2. Adjust egg switch orientation.
3. Tighten nut.
Adjusting Depth and Height
Refer to 5.5 Adjusting Swing-Away Mechanism, page 36.

5.5 Adjusting Swing-Away Mechanism

The swing-away mechanism can be used for different
options such as:
• PROTON wings of head array
• Extremity control joystick for chin control
• Egg switch
• 5/32" (4 mm) Allen key
Adjusting Depth
1. Loosen screw A.
2. Adjust rod to desired depth.
3. Tighten screw.
1578997-E