Alerts And Messages When Precondition For Route Steering Are Not Complete - Furuno FMD-3200 Operator's Manual

26. AUTOPILOT OPERATIONS
26.7.2 Alerts and messages when precondition for route steering are
not complete
When you select the GoAW mode and change the steering mode to NAVI at the Au-
topilot to activate the route steering, but route steering preconditions are not complete,
an alert and a message are given.
Alerts
Route steering precondition related alerts appear in the [Alert] box, at the bottom-right
position on the ECDIS screen. The alert flashes if it is an alarm or warning category
alert.
1 1
158
Course Difference
Alert ID no. and alert name
Alert "158 Course Difference" informs you that there is a difference between the cur-
rent heading of your ship and the required heading. The alert threshold is set during
the installation.
Alert "172 Off Track Alarm" appears if the ship is outside the channel limits of the
route.
Alert "665 Auto Pilot Mode Conflict" informs you that neither the ECDIS nor the Au-
topilot can start the route steering mode. First change the steering mode from NAVI
*2
to AUTO
*1
REMOTE CONTROL on FAP-3000
*2
HEADING CONTROL on FAP-3000
Alert "690 TC Start Timeout" informs you that the 60-second timeout has passed be-
fore you changed the mode to NAVI. After you select the GoSEA or GoAW at the EC-
DIS, you have 60 seconds to change the mode to NAVI, otherwise alert 690 is given.
26-18
5 5 6 6
then check that the preconditions for the route steering are complete.
*1