Chart Usage Log - Furuno FMD-3200 Operator's Manual

19. RECORDING, PLAYBACK FUNCTIONS
19.4

Chart Usage Log

The [Chart Usage] log stores which charts were used on the ECDIS display. To open
the log, click [Record], [NAV Log] and [Chart Usage] on the InstantAccess bar. The
following information is recorded in the chart usage log:
• Date and time chart was displayed
• Chart ID
• Center position of display (Lat, Lon)
• Chart source
• Chart edition
• Display scale
• Compilation scale
• The latest update included to chart
• Chart base
• To show the logs of a specific period, enter the period to show with [Period Cov-
ered (UTC)] then click the [Set Period] button. Use the [Clear Period] button to display
all logs.
• To refresh the log, click the [Refresh] button.
• To search the log, do as follows:
1) Click the [Find] button to show the [Find text] box.
2) Click the input box then enter the text to search.
3) Select the search direction with the up or down radio button.
4) Click the [Find] button. The first matching text is highlighted in yellow at the top of
the screen.
5) To continue the search click the [Find] button. To cancel the search, click the
[Cancel] button.
• To print the log, click the [Print Text] button.
19-8