11. The ECDIS stops the Backup Navigator Alarm and resets the contact signal.
90 sec.
before WOL
ACK
(1) ECCI
released
Waypoint-related indications in the Route Information box
The text "GoSEA Appr. En-
abled" or "GoAW Appr. En-
abled" appears in the [Route
Information] box until you ac-
knowledge the Alert "150 Early
Course Change Indication".
When you acknowledge the
waypoint approach alert, the
text "GoSEA Turn Enabled" or
"GoAW Turn Enabled" appears
in the [Route Information] box.
During a turn, the text
"GoSEA Turn" or "GoAW Turn"
appears in the [Route Informa-
tion] box.
Note: When you approach the last waypoint, the Alert "652 Last WPT Approach" ap-
pears. If you acknowledge Alert 652 when the Autopilot is in the NAVI mode, the route
steering is automatically stopped and the system shows Alert "665 Auto Pilot Mode
Conflict". Route steering is deactivated until the NAVI mode is selected again at the
Autopilot. To return to the route steering, the ship's heading must be set toward the
next waypoint and the ship must be inside the channel limits. Otherwise, an alert is
given.
30 sec.
before WOL
No ACK
(2) CCI
(3) CCA
released
released
26. AUTOPILOT OPERATIONS
30 sec.
after WOL
No ACK
(4) Backup
navigator alarm
released
26-21