Furuno FMD-3200 Operator's Manual page 185

To close the [Instant Track] dialog box, click the [Close] button. (The system continues
monitoring the instant track route.)
The following occurs when sensor data is lost while using the instant track function.
Monitoring condition
Instant track route monitor-
ing.
No monitored route
Monitored route active
How to stop monitoring an instant track route
Click the [Stop] button on the [Monitoring] page in the [Instant Track] dialog box to stop
monitoring the instant track route. The system returns to monitoring the monitored
route and the [Planning] page of the [Instant Track] dialog box opens.
For the [Back to Track] mode, the instant track mode is canceled when the vessel re-
turns to the monitored route. The instant track is greyed out to show that it is inactive.
• An instant track route under creation is deleted. No
route can be created.
• The [Stop] button is pushed or the instant track route
is followed until its completion.
• After the instant track route is completed, an error
message appears and the [Instant Track] dialog box
closes.
An instant track route under creation is deleted.
After the route is completed, an error message appears
and the [Instant Track] dialog box closes.
11. HOW TO MONITOR ROUTES
Result
11-11