Furuno FMD-3200 Operator's Manual page 400

APPENDIX 5 ALERT LIST
No. Text
277 Wind Speed/Direc-
tion Not Available
278 STW Not Available
279 COG/SOG Not
Available
280 SDME 1 COM Er-
ror
281 SDME 2 COM Er-
ror
282 SDME 3 COM Er-
ror
285 Heading Magnetic
Not Available
290 EPFS 1 COM Error
AP-42
Default Meaning
Warning
Wind speed/direction data
of all available WIND
sensors has been not
available for more than 3
seconds.
Caution
STW data of all available
SDME sensors has been
not available for more than
3 seconds.
Warning
COG/SOG data of all
available GPS sensor has
been not available for more
than 3 seconds.
Caution
Speed data from No.1
SDME has been
discontinued for more than
set time. (Set at installation)
Default: 60 seconds
No.1 SDME is turned off, or
there is a problem with
network.
Caution
Speed data from No.2
SDME has been
discontinued for more than
set time. (Set at installation)
Default: 60 seconds
No.2 SDME is turned off, or
there is a problem with
network.
Caution
Speed data from No.3
SDME has been
discontinued for more than
set time. (Set at installation)
Default: 60 seconds
No.3 SDME is turned off, or
there is a problem with
network.
Caution
Heading data of all
available magnetic gyro
has been not available for
more than 3 seconds.
Caution
Ship position data from
No.1 GPS has been
discontinued for more than
set time.(Set at installation)
Default: 60 seconds
No.1 GPS is turned off, or
there is a problem with
network.
Remedy
Check the connection with
all wind sensors.
Check the connection with
all SDME.
Check the connection with
all GPS.
Check the connection with
No.1 SDME and network.
Check the connection with
No.2 SDME and network.
Check the connection with
No.3 SDME and network.
Check the connection with
all magnetic gyro.
Check the connection with
No.1 GPS and network.