How To Import A User Chart Created With Ecdis Fea-2X07 - Furuno FMD-3200 Operator's Manual
Electronic chart display and information system, ecdis
Hide thumbs
Also See for FMD-3200:
- Operator's manual (508 pages) ,
- Installation manual (142 pages) ,
- Instruction manual (133 pages)
Table of Contents
Advertisement
10. USER CHARTS
10.3
How to Import a User Chart Created with ECDIS
FEA-2x07
User charts created at the ECDIS FEA-2x07 can easily be imported to this ECDIS.
Copy the user charts to a folder (see chapter 17 in the operator's manual of the FEA-
2x07) in a USB flash memory then do as follows. Note that FEA-2x05 created user
charts cannot be imported.
1. Set the USB flash memory to the USB port on the Control Unit.
2. Activate the Voyage planning mode.
3. Click the [Manage Data], [Data Import] and [User Chart] buttons to show the [SE-
LECT DIRECTORY] dialog box.
4. Select the folder that contains the user chart(s) to be imported then click the [OK]
button.
User Chart Data Import from legacy ECDIS
5. Check the user chart(s) to import then click the [Import] button.
10-6
USB Flash
04.04.2012 19:23
Advertisement
Table of Contents
Troubleshooting
