Furuno FMD-3200 Operator's Manual page 396

APPENDIX 5 ALERT LIST
No. Text
089 EC-3000 CPU
board Battery
Power Error
090 EC-3000 CPU
board Core
Power Error
094 Sensor Adapter 11
COM Timeout
095 Sensor Adapter 12
COM Timeout
096 Sensor Adapter 13
COM Timeout
097 Sensor Adapter 14
COM Timeout
098 Sensor Adapter 15
COM Timeout
099 Sensor Adapter 16
COM Timeout
150 Early Course
Change Indication
AP-38
Default Meaning
Caution
CPU board battery voltage
in processor unit is out of
threshold.
Caution
CPU board core voltage in
processor unit is out of
threshold.
Caution Communication error with
No.11 sensor adapter is de-
tected. 30 seconds timeout.
No.11 sensor adapter is
turned off, or there is a prob-
lem with network.
Caution Communication error with
No.12 sensor adapter is de-
tected. 30 seconds timeout.
No.12 sensor adapter is
turned off, or there is a prob-
lem with network.
Caution Communication error with
No.13 sensor adapter is de-
tected. 30 seconds timeout.
No.13 sensor adapter is
turned off, or there is a prob-
lem with network.
Caution Communication error with
No.14 sensor adapter is de-
tected. 30 seconds timeout.
No.14 sensor adapter is
turned off, or there is a prob-
lem with network.
Caution Communication error with
No.15 sensor adapter is de-
tected. 30 seconds timeout.
No.15 sensor adapter is
turned off, or there is a prob-
lem with network.
Caution Communication error with
No.16 sensor adapter is de-
tected. 30 seconds timeout.
No.16 sensor adapter is
turned off, or there is a prob-
lem with network.
Warning
Waypoint is soon being
approached. Ship's position
is less than set time of
prewarning from WOL.
Default: 90 seconds
Remedy
Turn off Processor Unit. If
same error occurs after a
few minutes, contact
FURUNO.
Turn off Processor Unit. If
same error occurs after a
few minutes, contact
FURUNO.
Check the connection with
No.11 sensor adapter and
network.
Check the connection with
No.12 sensor adapter and
network.
Check the connection with
No.13 sensor adapter and
network.
Check the connection with
No.14 sensor adapter and
network.
Check the connection with
No.15 sensor adapter and
network.
Check the connection with
No.16 sensor adapter and
network.
Be careful that WPT is
approaching.