Table of Contents
Advertisement
Advanced: Maintain
Default User:
Admin is the default user account. If multiple user accounts
have been created, click the drop down menu to disable.
Auto Reboot:
It's recommended leaving this option enabled, as it maintains
the operational integrity of your NVR.
Reboot:
Choose an appropriate day and time to reboot your NVR.
Upgrade:
Click this button to upgrade the firmware from a USB flash drive.
Select the firmware file then "OK" to confirm. When the firmware upgrade
has completed, your NVR will reboot automatically.
Load Settings:
Click this button to import a configuration file containing all
the settings that you have customised.
IPC Load Default:
Click this button to restore the camera's default settings.
Click for contents
Click the checkbox for the camera that you want to restore or click "Select
All" to select all cameras. Click "OK" to continue. A message will appear on-
screen and the camera will momentarily reset. Click "Exit" to close.
Load Default:
Click this button to restore your NVR's default settings. Click
"All" then click "Save". The Startup Wizard will appear on-screen after reboot.
Save Settings:
Click this button to export a configuration file containing all
the settings that you have customised.
Reboot IPC:
Click this button to reboot the camera. Click the checkbox for
the camera that you want to reboot or click "Select All" to select all cameras.
Click "OK" to continue. A message will appear on-screen and the camera will
momentarily reset. Click "Exit" to close.
(continued on next page)
· Don't forget to click "Save"
to apply settings.
· Click the "Default" button to
revert back to default settings.
· Click the "Close" button to
exit the Main Menu.
67
Advertisement
Table of Contents
