Network: Advanced - Swann GuardianEye Instruction Manual

Network: Advanced

Email Settings:
Click the "Set" button if any changes are required to
your email account - see page 29 for more information.
Server Port:
This is the port that your NVR will use to send information
through. The default number will work in most situations.
HTTP Port: This port is used to log into your NVR from a remote location.
NTP (Network Time Protocol): This function allows your NVR to auto-
matically sync its clock with an on-line server. This gives it the ability to
constantly have an accurate time setting.
UID:
This is your NVR's unique identification code. Click "Send UID" to
send this to your email address.
• Click the "Default" button to revert back to default settings.
• Don't forget to click "Apply" to save settings.
28