Table of Contents
Advertisement
Display: IP Channel
This function is an advanced feature that is used to manage the cameras
connected directly to your NVR as well as compatible IP cameras connected
to your router. In most circumstances, the functions available here will not be
needed for general use of your NVR.
When adding one or more cameras connected to your router, you need to
change Switch Mode to manual (see page 53 - Network: Switch).
1.
Click this button "User-defined add" to add your network connected cam-
era.
2.
After a short moment, your NVR will detect the camera and it will appear
as shown in the screenshot above-right. Click the checkbox to select.
3.
Input the password (if required) and click the drop down menu to select the
channel that you would like to add the camera to.
Click for contents
2
3
1
4.
Click this button "Add selected" to add the camera. A green status button
will appear indicating successful connection. Click the "Close" button to fin-
ish.
Please note:
If you see "Off-line" in Live View mode for the camera that
you have added, this indicates that either a setting has changed (such as
password), or it has been physically disconnected from your router.
4
33
Advertisement
Table of Contents
