Table of Contents
Advertisement
Device: S.M.A.R.T. (8 channel model)
This function can be used to
display technical information
on the hard drive installed
inside your NVR. You can
also perform a test (there
are three types available) to
evaluate and detect potential
drive errors.
Whole Evaluation not passed, continue to use the disk:
the hard drive has developed a fault (such as one or more bad sectors), you
can instruct your NVR to continue saving to the drive.
Self-check Type:
There are three types available:
Conveyance:
This is a very quick test that verifies the mechanical parts of the
hard drive are working.
Short:
This test verifies major components of the hard drive such as read/
write heads, electronics and internal memory.
Long:
This is a longer test that verifies the above as well as performing a
surface scan to reveal problematic areas (if any) and forces bad sector relo-
cation.
Click for contents
If for some reason
When performing a test, your NVR will continue to work as normal.
In most circumstances, the information here will not be needed for general
use of your NVR, however one of our Swann Helpdesk & Technical Support
staff may ask you to access this if you call for assistance.
· Don't forget to click "Save"
to apply settings.
· Click the "Close" button to
exit the Main Menu.
61
Advertisement
Table of Contents
