Table of Contents
Advertisement
Advanced: Maintain
IPC Upgrade:
Click this button to upgrade the camera's firmware from a USB
flash drive. Select the firmware file, click the checkbox for the camera that
you want to upgrade or click "All" to select all cameras then click "OK" to
confirm. When the firmware upgrade has completed, the camera will mo-
mentarily reset. Click "OK" to close. It's recommended to reboot your NVR to
maintain operational integrity.
Please note:
To restore all default settings on your NVR, you need to
restore your NVR and camera (changes to image settings are stored on
the camera).
Click for contents
· Don't forget to click "Save"
to apply settings.
· Click the "Default" button to
revert back to default settings.
· Click the "Close" button to
exit the Main Menu.
68
Advertisement
Table of Contents
