Table of Contents
Advertisement
Display: Live
The configuration options
available allow you to name
each camera relevant to
where it has been installed
as well as the ability to ad-
just image settings such as
brightness and contrast. You
can also change how the
date and time format are dis-
played in Live View mode.
Channel:
Select a camera that you would like to edit.
Channel Name:
Enter a name for the camera you've selected. It can be up to
eight characters in length.
Show Name:
Leave this enabled to display the camera name in Live View
mode, otherwise click the drop down menu to disable.
Record Time:
It's recommended to leave this enabled, as a timestamp will
be embedded on all video recordings. This allows you to easily identify when
events have occurred. You can disable this if you wish.
Date Format:
Select a preferred display format (this is independent to the
date format selected for the NVR itself).
Time Format:
Select a preferred display format (this is independent to the
Click for contents
time format selected for the NVR itself).
Refresh Rate:
This setting correlates to the "Video Format" selection in the
Startup Wizard. When selecting "NTSC", 60Hz will be displayed. When se-
lecting "PAL", 50Hz will be displayed.
OSD Position:
Allows you to change the position of the on-screen display on
the Live View screen. Click the "Setup" button then use the mouse to reposi-
tion. Right-click the mouse then click "Save".
Color:
Click the "Setup" button to access the image adjustment tools:
Channel:
Select a camera that you would like to edit.
Hue:
This changes the color mix of the image.
(continued on next page)
· Don't forget to click "Save"
to apply settings.
· Click the "Close" button to
exit the Main Menu.
12
Advertisement
Table of Contents
