Table of Contents
Advertisement
Display: Image Control
The functions available en-
able you to control the ap-
pearance and characteristics
of the image shown from
each camera. Each function
can be adjusted to obtain the
best possible image quality,
providing you the flexibility
to install the camera in the
most challenging of lighting
situations.
Channel:
Select a camera that you would like to edit.
IR-CUT Mode:
Lets you choose how the camera handles color and how it
manages the transition from daytime to night-time and vice versa:
GPIO Auto:
This will instruct the camera to switch automatically from "Color
Mode" to "Black White mode" and vice versa. This setting will be suitable for
most camera locations.
Color Mode:
This will instruct the camera to operate in color mode only. In
low light conditions, the color will be quite faint. Image clarity will also be
reduced in low-light conditions.
Black White Mode:
This will instruct the camera to operate in black & white
mode only.
Click for contents
Front Yard
09/05/2017 04:30:15 PM
IR-Cut Delay:
Controls the delay of the IR cut filter when transitioning from
daytime to night-time. The default setting will be suitable for most camera
locations but can be adjusted if needed. Click and hold the slider left or right
to change. The higher the number, the greater the delay.
Lens Flip:
Lets you turn the image upside down.
Angle Flip:
Lets you horizontally reverse the orientation of the image.
Back Light:
Improves exposure of an object that is in front of a light source.
This may happen if an object is in front of a window or if a person is coming
in from the outside. The camera will pick up the natural light, therefore the
object or person in the foreground becomes dark. If the camera is mounted
in a location where this is required, click the drop down menu to enable.
(continued on next page)
· Don't forget to click "Save"
to apply settings.
· Click the "Close" button to
exit the Main Menu.
14
Advertisement
Table of Contents
