Reducing Printer Noise - Lexmark M5163dn User Manual

Saving money and the environment
3
Select a setting.
Use To
Off Use the factory default settings for all settings associated with Eco‑Mode.
Notes:
•
•
Energy Reduce energy use, especially when the printer is idle.
Notes:
•
•
•
•
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper Enable the automatic two‑sided (duplex) printing feature.
4
Click Submit.

Reducing printer noise

Enable Quiet mode to reduce the printer noise.
1
From the printer control panel, navigate to:
> Settings >
2
Select a setting.
Use
On
Off
3
Press .
Settings that were changed when other modes were selected are reset to the factory
default settings.
Off supports the performance specifications of the printer.
Printer engine motors do not start until a document is ready to print. You may notice a
short delay before the first page is printed.
The printer enters Sleep mode after one minute of inactivity.
The printer display is turned off when the printer is in Sleep mode.
Lights on the staple finisher and other optional finishers are turned off when the printer is
in Sleep mode.
> Settings > > General Settings > > Quiet Mode >
To
Reduce printer noise.
Notes:
•
Print jobs process at a reduced speed.
•
Printer engine motors do not start until a
document is ready to print. There is a short delay
before the first page is printed.
•
The alarm control and cartridge alarm sounds are
turned off.
•
The printer ignores the Advance Start command.
Use factory default settings.
Note: This setting supports the performance
specifications of the printer.
131