Load Staples - Lexmark M5163dn User Manual

Troubleshooting
Load multipurpose feeder with [paper size] [orientation]
Try one or more of the following:
•
Load the multipurpose feeder with the correct paper size.
•
Press to clear the message and continue printing.
Note: If no paper is loaded in the feeder, the printer manually overrides the request, and then prints
from an automatically selected tray.
•
Cancel the current job.
Load multipurpose feeder with [paper type] [paper size] [orientation]
Try one or more of the following:
•
Load the multipurpose feeder with the correct paper size and type.
•
Press to clear the message and continue printing.
Note: If no paper is loaded in the feeder, the printer manually overrides the request, and then prints
from an automatically selected tray.
•
Cancel the current job.

Load staples

Try one or more of the following:
•
Replace or insert the specified staple cartridge in the finisher.
For more information, see the "Replacing supplies" section of the User's Guide.
•
From the printer control panel, press
•
Cancel the print job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at
http://support.lexmark.com
If necessary, press
Maintenance kit nearly low [80.xy]
For more information, visit the Lexmark support Web site at
support, and then report the message.
If necessary, press
or contact customer support, and then report the message.
on the printer control panel to clear the message and continue printing.
on the printer control panel to clear the message and continue printing.
to clear the message and continue printing.
http://support.lexmark.com
181
or contact customer