Lexmark M5163dn User Manual page 109

Understanding the printer menus
Use
Paper Sizes
US
Metric
Home screen customization
Change language
Search Held Jobs
Held Jobs
USB Drive
Bookmarks
Jobs by user
Output Lighting
Normal/Standby Mode
Off
Dim
Bright
Alarms
Alarm Control
Cartridge Alarm
Staple Alarm
Hole Punch Alarm
Timeouts
Sleep Mode
Disabled
1–120
Timeouts
Print with Display Off
Allow printing with display off
Display on when printing
To
Specify the unit of measurement for paper sizes.
Note: US is the factory default setting.
Change the icons that appear on the control panel.
Select from the following options:
Display
Do not display
Notes:
•
Display is the factory default setting for Search Held
Jobs, Held jobs, and USB Drive.
•
Do not display is the factory default setting for Change
Language, Bookmarks, and Jobs by user.
Set the amount of light from the bin.
Notes:
•
If Eco-Mode is set to Energy or Energy/Paper, then Dim is
the factory default setting.
•
If Eco-Mode is set to Off or Paper, then Bright is the
factory default setting.
•
This menu appears only when an indicator light is
installed in the bin or an optional bin with an indicator
light is added.
Set an alarm when the printer requires user intervention.
Select from the following options:
Off
Single
Continuous
Notes:
•
Single is the factory default setting for Alarm Control.
•
Off is the factory default setting for Cartridge Alarm,
Staple Alarm, and Hole Punch Alarm.
Set the idle time before the printer begins operating in Sleep
Mode.
Notes:
•
20 minutes is the factory default setting.
•
Disabled appears only when Energy Conserve is set to
Off.
Print a job with the display turned off.
Note: Display on when printing is the factory default setting.
109