Precautions - Omron SYSDRIVE 3G3EV User Manual

Getting Started
Voltage Class
2 Three-phase 200-VAC input
B Single/Three-phase 200-VAC
input
Installation Type/Option
A Panel mounting
P Option
D Checking for Damage
Check the overall appearance and check for damage or scratches resulting from trans-
portation.
H Checking Accessories
Note that this manual is the only accessory provided with the 3G3EV (Standard Model).
Set screws and other necessary parts must be prepared by customers.

1-2 Precautions

To ensure safe operation of the 3G3EV, note the following items:
H Always Hold the Heat Sink During Removal.
When moving the 3G3EV, always hold the heat sink (aluminum portion on the rear of the
Unit).
H Watch Out for Residual Voltage On Charged Portions
After the power is turned off, residual voltage remains in the capacitor inside the
Inverter. Therefore, touching terminals immediately after turning the power off may
cause an electrical shock.
Heat sink
Special Specification
-E English Models
-CUE UL/CUL and EC Directives
Models
Blank Japanese Models
Chapter 1
1-3