Turning On / Off The Power - EverFocus EMV400S FHD User Manual

EMV400S FHD / EMV400SSD Mobile DVR

2.4 Turning On / Off the Power

Before powering on the mobile DVR, please make sure the internal storage devices have been
installed properly. Once you have completed the basic cable connections, you are ready to turn
on the mobile DVR. Simply plug in the power source. The POWER LED will light up if power is
normal. Once the system has finished loading, you can begin to set up the menu options for the
mobile DVR.
To turn off the power, please go to OSD Root Menu > System > System Setting > Miscellaneous
setting page, and click Shutdown (refer to 6.9.7 Miscellaneous). After the message pops up as
below, you can now turn off the power source.
Note that when the mobile DVR is placed in an environment where the temperature is very low
(for example, -40°C, the mobile DVR will NOT turn on immediately.)
22