Ftp - EverFocus EMV400S FHD User Manual

7.3.7.6 FTP

Set up the FTP server settings to enable the FTP function. The function is for users to upload the
alarm / motion recordings or snapshots from sub stream to the FTP server. You can choose to
upload either the recordings or snapshots, please see 7.3.3 Record and 7.3.4.3 Motion.
FTP Server: Enter the IP address or the host name of the FTP server.
Port: Enter the port number for the FTP server. Default is 21.
User Name: Set FTP User's name.
Password: Set FTP password.
File Name: Enter the file name.
Note: If you want to upload recordings to the FTP, please go to the Remote / Mobile setting
page to select H.264 codec.
Save: Click to save the settings.
EMV400S FHD / EMV400SSD Mobile DVR
187