EverFocus EMV400S FHD User Manual page 234

4 channels 1080p full hd mobile dvr
Hide thumbs Also See for EMV400S FHD:
Table of Contents

Advertisement

EMV400S FHD / EMV400SSD Mobile DVR
Pre-Installation
EverFocus' mobile DVR can operate using one of three types of networking connections.
Simple One to One Connection: A simple one to one connection is the simplest type of network
connection. It uses a cross-over cable to make a direct connection from one computer to another
(or in this case a computer to a mobile DVR).
Direct High Speed Modem Connection: A direct modem connection uses a standard network cable
to connect the modem directly to a computer (or in this case a modem to the mobile DVR). This
type of connection only covers single-port modems. For a combination modem/router, use the
setup described below.
Router or LAN Connection – A local area network connection requires either a router or a pre-
existing LAN connection. This is the most common type of connection. A router allows multiple
computers and mobile DVR's to access each other as well as the Internet. It assigns different
internal IP addresses to the computers.
225

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emv400ssd

Table of Contents