Dimensions; Mounting The Mobile Dvr - EverFocus EMV400S FHD User Manual

2.1.1

Dimensions

EMV400S FHD
EMV400SSD
2.1.2

Mounting the Mobile DVR

To mount the mobile DVR onto a surface inside a vehicle:
1. Optionally drill four holes on the mounting surface according to the hole-position on the
mobile DVR and then insert the four supplied Anchors into the holes on the mounting
surface. Place the mobile DVR on the mounting surface against the anchoring surface so
that the holes line up.
2. Screw the mobile DVR to the mounting surface using the supplied four Screws.
3. The mounting process is now complete. You can start connecting cables and the desired
devices to the mobile DVR. Please refer to 2.3 Basic Connection for more details.
EMV400S FHD / EMV400SSD Mobile DVR
10