Set Up A Dynamic Dns Service Account; Create Static Routes - TP-Link Archer C28HP User Manual

Chapter 4
4. 7. 5.

Set Up a Dynamic DNS Service Account

Most ISPs assign a dynamic IP address to the router and you can use this IP address to
access your router remotely. However, the IP address can change any time and you don't
know when it changes. In this case, you might apply the DDNS (Dynamic Domain Name
Server) feature on the router to allow you and your friends to access your router and
local servers (FTP, HTTP, etc.) using domain name without checking and remembering
the IP address.
Note:
DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
To set up DDNS, please follow the instructions below:
1. Visit http://tplinkwifi.net, and log in with password you set for the router.
2. Go to Advanced > Network
3. Select the DDNS Service Provider
select a service provider and click
4. Enter the username, password and domain name of the account.
5. Click Login and Save.
Tips:
If you want to use a new DDNS account, please
4. 7. 6.

Create Static Routes

Static routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.
I want to:
> Dynamic DNS.
(NO-IP or DynDNS). If you don't have a DDNS account,
Go to register.
logout first, and then login with the new account.
Visit multiple networks and servers at the same time.
For example, in a small office, my PC can surf the Internet through
Router A, but I also want to visit my company's network. Now I
have a switch and Router B. I connect the devices as shown in
41