The Back Panel - TP-Link Archer C28HP User Manual

Chapter 1
LED Explanation
Name
WAN
PWR
2.4G/5G
RE
1. 2. 2.

The Back Panel

The following parts (view from left to right) are located on the rear panel.
Item
Power Port
Power On/Off
Wi-Fi On/Off
Reset Button
WAN Port
Status
Blue On The Internet is available.
Orange On The router's WAN port is connected, but the Internet is not available.
Off The router's WAN port is not connected.
On System initialization completes.
System initialization or firmware upgrade is in progress. Do not
Blinking
disconnect or power off the router.
Off Power is off.
On The corresponding wireless function (2.4G/5G) is working properly.
Off The corresponding wireless function (2.4G/5G) is disabled.
The router is connecting to the host network. This process will last in
Blinking
the first 2 minutes.
The router has been successfully connected to the host network, and
On
it is working in Range Extender mode.
For connecting the router to a power socket via the provided power adapter.
For powering on or off the router.
Press and hold this button about 2 seconds to enable or disable Wireless function.
Use a pin to press and hold this button until all the LED turn on momentarily to reset
the router to its factory default settings.
For connecting to a DSL/Cable modem, or an Ethernet port.
Indication
Description
4