Table of Contents
Advertisement
Chapter 2
2. 2. 2.
Router mode
This mode enables multiple users to share Internet connection via ADSL/Cable Modem.
1. Follow the steps below to connect your router.
If your Internet connection is through an Ethernet cable from the wall instead of through
a DSL / Cable / Satellite modem, connect the Ethernet cable directly to the router's
WAN port, and then follow Step 4 and 5 to complete the hardware connection.
Modem
1
Turn off the modem, and remove
the backup battery if it has one.
3
Replace the battery, turn on the
modem and wait about 2
minutes for it to restart.
1 ) Turn off the modem, and remove the backup battery if it has one.
2 ) Connect the modem to the WAN port on your router with an Ethernet cable.
3 ) Turn on the modem, and then wait about 2 minutes for it to restart.
4 ) Connect the power adapter to the router and turn on the router.
5 ) Verify that the hardware connection is correct by checking these LEDs.
Tips: If 2.4G or 5G LED is off, press and hold the Wi-Fi On/Off button until it is on.
2. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
• Method 2: Wirelessly
4
2
Connect the modem to the
WAN port on the router via
an Ethernet cable.
WPS
LAN
WAN
PWR
2.4G
5G
ON
ON
ON
ON
Ethernet cable
Connect the power adpter to the router and turn on the router.
RE
8
Advertisement
Table of Contents
