Table of Contents
Advertisement
Chapter 4
Done!
4. 7. 4.
Specify DHCP Server Settings
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and
the router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
devices from the IP Address Pool. You can change the settings of the DHCP Server if
necessary, and you can reserve LAN IP addresses for specified client devices.
1. Visit http://tplinkwifi.net, and log in with password you set for the router.
2. Go to
Advanced
>
Network
• Select
Bridge
parameters are required.
• Select
Custom
necessary parameters.
3 ) After you have selected a mode, the necessary parameters,
including the LAN port for IPTV connection, are predetermined.
If not, select the LAN type to determine which port is used to
support IPTV service.
4 ) Click Save.
5 ) Connect the set-top box to the corresponding LAN port which
is predetermined or you have specified in Step 3.
Your IPTV setup is done now! You may need to configure your
set-top box before enjoying your TV.
Tips:
Qos and IPTV cannot be enabled at the same time.
>
DHCP
Server.
if your ISP is not listed and no other
if your ISP is not listed but provides
39
Advertisement
Table of Contents
