Table of Contents
Advertisement
Chapter 2
Note:
If the above screen does not pop-up, it means that your IE Web-browser has been set to a proxy. Go to Tools menu >
Internet Options > Connections > LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click
OK to finish it.
4. After successfully login, follow
5.
Enjoy!
For wireless devices, you may have to reconnect to the wireless network if you
have customized the SSID (wireless name) and password during the configuration.
2. 2. 3.
Range Extender Mode
This mode boosts your home wireless coverage.
1. Configure：Using RE Button is an easy way to extend your host network. We
recommend you to use this way if your host router has the WPS button. The button
might look like these:
• Option One: Using RE Button
1 ) Press the WPS button on the host router.
2 ) Press and hold the
minute. The router will start to reboot.
3 ) After rebooted, the
successful connection.
Note: If not, please refer to the Option Two.
• Option Two: Using Web Browser
1 ) Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID
(wireless name) and password printed on the bottom label of the router.
2 ) Enter
http://tplinkwifi.net
username and password, and then click Login.
Quick Setup
WPS
RE button
on the top panel of router for about 3 seconds within 1
RE LED
should change from blinking to a solid state, indicating a
in the address bar of a web browser. Use
to complete the configuration.
admin
for both
10
Advertisement
Table of Contents
