Table of Contents
Advertisement
Chapter 4
1. Visit http://tplinkwifi.net, and log in with password you set for the router.
2. Go to
Advanced
3. Enable
DoS
Protection.
4. Set the level (Off, Low,
Filtering,
UDP-FlOOD Attack Filtering
•
ICMP-FLOOD Attack Filtering
Message Protocol) flood attack.
•
UDP-FlOOD Attack Filtering
Protocol) flood attack.
•
TCP-SYN-FLOOD Attack Filtering
Control Protocol-Synchronize) flood attack.
Tips:
The level of protection is based on the number of traffic packets. The protection will be triggered immediately
when the number of packets exceeds the preset threshold value (the value can be set on
Tools
>
System Parameters
DoS Host
List.
5. If you want to ignore the ping packets from the WAN port, select
From WAN
Port; if you want to ignore the ping packets form the LAN port, select
Ignore Ping Packet From LAN
6. Click Save.
>
Security
> Settings.
Middle
or High) of protection for
- Enable to prevent the ICMP (Internet Control
- Enable to prevent the UDP (User Datagram
>
DoS Protection Level
Port.
and
TCP-SYN-FLOOD Attack
- Enable to prevent the TCP-SYN (Transmission
Settings), and the vicious host will be displayed in the
ICMP-FLOOD Attack
Filtering.
Advanced
>
System
Blocked
Ignore Ping Packet
22
Advertisement
Table of Contents
