Chapter 6
6. 5. 2.
Specify DHCP Server Settings
By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
extender acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
devices from the IP Address Pool. You can change the settings of the DHCP Server if
necessary.
1. Visit
http://tplinkwifi
.net, and log in with the password you set for the extender.
2. Go to
Settings
>
Network
>
DHCP
Server.
¾ To specify the IP address that the extender assigns:
1. Select
Auto
(recommended) or
On
to enable the DHCP Server.
2. Enter the starting and ending IP addresses in the
IP Address
Pool.
3. Enter other parameters if the ISP requires them. The
Default Gateway
is automatically filled in
and is the same as the LAN IP address of the extender.
4. Click Save.
¾ To view the DHCP Client List:
You can view the information of the DHCP clients connected to the extender in the
DHCP Client List.
84