Table of Contents
Advertisement
Chapter 6
6. 4. 2.
Use WPS for Wireless Connection
Wi-Fi Protected Setup (WPS) provides an easier approach to set up a security-protected
Wi-Fi connection.
1. Visit http://tplinkwifi.net, and log in with password you set for the router.
2. Go to
Settings
>
Wireless
Use the WPS button
Click
WPS start
button on the page, and immediately tap the
supported devices such as Android phones, tablets or most network cards within two
minutes.
Set the Router's PIN
Router's PIN is enabled by default to allow wireless devices to connect to the router
using the PIN. You can use the default one or generate a new one.
Note:
• If you want to enable/disable the WPS feature, go to
or uncheck the box for
• PIN (Personal Identification Number) is an eight-character identification number preset to each router.
WPS supported devices can connect to your router with the PIN. The default PIN is printed on the label
of the router.
>
WPS
.
Enable
WPS.
WPS
System Tools
>
System Parameters
button on your WPS-
> WPS, check
82
Advertisement
Table of Contents
