Table of Contents
Advertisement
Chapter 6
Use the Client's PIN
Enter the client's PIN in the field, and click Connect.
3.
Success
will appear on the above screen and the WPS LED on the router will keep on for five
minutes if the client has been successfully added to the network.
6. 5.
Customize Your Network
6. 5. 1.
Change LAN Settings
The extender is preset with a default LAN IP 192.168.0.254, with which you can log in to
the web management page. The LAN IP address, together with the Subnet Mask, also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit
http://tplinkwifi
2. Go to
Settings
>
Network
3. Select
Use the following IP
4. Enter a new IP address as needed and leave the
enter the gateway that is in the same subnet as the IP address. The gateway is usually the LAN
IP address of your extender.
5. Click Save.
.net, and log in with the password you set for the extender.
> LAN.
address.
Subnet Mask
as the default settings and
83
Advertisement
Table of Contents
