Table of Contents
Advertisement
Chapter 4
•
LACP passive: enables LACP only when an LACP device is detected.
5. Specify two ports for link aggregation.
6. Click Save.
4. 7. 3.
Configure to Support IPTV Service
I want to:
How can
I do that?
Configure IPTV setup to enable Internet/IPTV/Phone service
provided by my Internet Service Provider (ISP).
1. Visit http://tplinkwifi.net, and log in with password you set for
the router.
2. Go to
Advanced
>
3. If your ISP provides the networking service based on IGMP
technology, e.g., British Telecom(BT) and Talk Talk in UK:
1 ) Check the box for
either V2 or V3, as required by your ISP.
2 ) Click Save.
3 ) After configuring IGMP proxy, IPTV can work behind your router
now. You can connect your set-top box to any of the router's
Ethernet port.
If IGMP is not the technology your ISP applies to provide
IPTV service:
1 ) Tick
Enable
IPTV.
2 ) Select the appropriate
Network
> IPTV.
IGMP Proxy
and select the
Mode
according to your ISP.
IGMP
Version,
38
Advertisement
Table of Contents
