Toyota LAND CRUISER Service Manual Supplement page 66

MANUAL TRANSMISSION (STATION WAGON) - OUTPUT SHAFT
6. INSTALL SNAP RING
(a) Select a snap ring that will allow minimum axial play.
(b) Using a brass bar and a hammer, drive in a new snap ring.
7. MEASURE THIRD GEAR THRUST CLEARANCE
Using a feeler gauge, measure the third gear thrust clear-
ance.
Standard clearance:
0.1 - 0.45 mm (0.0039 - 0.0138 in.)
8. INSTALL SECOND GEAR AND HUB SLEEVE NO.1 AS-
SEMBLY
(a) Apply gear oil to the shaft and needle roller bearing.
(b) Place the synchronizer rings on the gear and align the ring
slots with the shifting keys.
(c) Install the needle roller bearing in the second gear.
(d) Using a press, install the second gear and hub sleeve
No.1 assembly.
9. INSTALL SNAP RING
(a) Select a snap ring that will allow minimum axial play.
MT-37