Page 2 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column When driving Driving, stopping and safe-driving information Air conditioning and audio systems, as well as other in- Interior features terior features for a comfortable driving experience Maintenance and Cleaning and protecting your vehicle, performing do-it- care...
Page 3: Table Of Contents
For vehicles with a navigation system, refer to the “Navigation System Owner’s Manual” for information regarding the equipment listed below. • Navigation system • Audio/video system • Air conditioning • Toyota parking assist monitor 1-4. Opening and closing the Before driving windows and moon roof Power windows ....115 Moon roof ......
Page 4: Table Of Contents
Cruise control ..... 240 Automatic transmission..198 Dynamic radar cruise Turn signal lever ....204 control ......244 Parking brake...... 205 Toyota parking Horn ........206 assist-sensor ....258 Four-wheel drive system ..269 2-2. Instrument cluster Crawl Control (with Turn Gauges and meters ....
Page 5: Table Of Contents
TABLE OF CONTENTS Index 3-3. Using the storage features Interior features List of storage features..379 • Glove box ......380 • Console box ..... 381 3-1. Using the air conditioning • Overhead console.... 382 system and defogger • Cup holders...... 383 •...
Page 6: Table Of Contents
Maintenance and care When trouble arises 4-1. Maintenance and care 5-1. Essential information Cleaning and protecting Emergency flashers ... 500 the vehicle exterior ... 414 If your vehicle needs to Cleaning and protecting be towed ......501 the vehicle interior .... 417 If you think something is wrong......
Page 7: Table Of Contents
TABLE OF CONTENTS Index Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.).... 574 Fuel information ....591 6-2. Customization Customizable features ..593 6-3. Initialization Items to initialize ....602 Index Abbreviation list....604 Alphabetical index .... 605 What to do if...
Page 9 Pictorial index Exterior ∗ Moon roof P. 120 Outside rear view mirrors P. 111 Windshield wipers P. 229 Side turn signal ∗ lights P. 204 Hood P. 426 Side turn signal ∗ lights P. 204 ∗ Fog lights P. 228 Headlights P.
Page 10 Lift-up back door type Back door P. 54 Rear window defogger P. 373 Rear window wiper Stop/tail lights P. 224 P. 237 ∗ Roof luggage carrier P. 328 Fuel filler door P. 124 Side doors P. 50 Tires License plate lights P.
Page 11 Pictorial index Exterior Double back door type ∗ Rear window wiper P. 237 Rear window defogger P. 373 Rear turn signal lights P. 204 Fuel filler door P. 124 Side doors P. 50 Tires Back door P. 66 ●Rotation P. 445 ●Replacement P.
Page 12 Pictorial index Interior Head restraints P. 90 Seat belts P. 94 SRS driver airbag P. 137 Power window switches P. 115 SRS front passenger airbag P. 137 Ashtray P. 395 Floor mat P. 408 Front seats P. 72 ∗ Armrest P.
Page 13 Pictorial index Interior Vanity mirrors P. 391 Sun visors P. 390 ∗ Overhead console P. 382 ∗ Personal lights P. 377 ∗ Interior light P. 376 Rear seat entertainment ∗ system Interior light P. 376 Interior light P. 376 Anti-glare inside rear view mirror P.
Page 14 ∗ Driving position memory switches P. 85 Inside lock button P. 51 Power window switches P. 115 Window lock switch P. 115 Door lock switch P. 51 : NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.
Page 15 Pictorial index Interior Shift lever P. 198 Front seat heater/ventilator ∗ switch P. 402 Ashtray P. 395 ECT switch P. 200 Cigarette lighter P. 396 ∗ Power outlet P. 397 ∗* USB port Parking brake lever P. 205 “SHIFT LOCK” button P.
Page 16 Pictorial index Instrument panel Headlight switch P. 224 Turn signal lever P. 204 ∗ Fog light switch P. 228 Gauges and meters P. 207 ∗ Multi-information display P. 218, 518 Windshield wipers and washer switch P. 229 Rear window wiper and washer switch P.
Page 17 Pictorial index Instrument panel Without navigation system Clock P. 392 Front passenger’s Security indicator seat belt reminder light P. 129, 131 light P. 513 Emergency flasher switch P. 500 Outside temperature display Air conditioning P. 393 system P. 346, 353 Rear air conditioning control Rear window defogger switch P.
Page 18 With navigation system Outside temperature display P. 393 Clock Front passenger’s seat belt reminder light P. 513 Rear window Navigation system defogger switch P. 373 Air conditioning Security indicator system light P. 129, 131 Emergency flasher switch P. 500 Audio system ∗...
Page 19 Pictorial index Instrument panel ∗ DISP switch P. 220 ∗* Talk switch Audio remote controls ∗* ∗* Telephone switches (steering switches) Vehicles with a dynamic radar cruise control: Horn P. 206 Engine (ignition) switch (vehicles without Vehicle-to-vehicle ∗ a smart entry & start system) P.
Page 20 ∗ VIEW switch P. 286 ∗ Heater idle up switch P. 372 Engine (ignition) switch (vehicles with a smart entry & start system) P. 193 Four-wheel drive control switch P. 269 ∗ Power back door switch P. 55 ∗ Power back door main switch P.
Page 21 Outside rear view mirror control switches P. 111 ∗ Odometer/trip meter display change button P. 207 ∗ Instrument cluster light control knob P. 211 Toyota parking assist-sensor ∗ switch P. 258 Center differential lock/unlock switch P. 269 Roll sensing of curtain shield airbags off switch P.
Page 22: Luggage Compartment
Pictorial index Luggage compartment Lift-up back door type Head restraint angle lever P. 90 Seatback handles P. 79 ∗ Power back door switch P. 54 ∗ Power outlet P. 397 Tools P. 534 Seatback angle lever P. 75 Warning reflector holder P.
Page 23 Pictorial index Luggage compartment Double back door type Back door inside lock knob P. 68 Tools P. 534...
Page 24 ∗ : If equipped...
Page 25: For Your Information
All specifications provided in this manual are current at the time of printing. However, because of the Toyota policy of continual product improvement, we reserve the right to make changes at any time without notice. Depending on specifications, the vehicle shown in the illustrations may differ from your vehicle in terms of equipment.
Page 26 ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. Vehicle data recordings Your Toyota is equipped with several sophisticated computers that will record certain data, such as: •...
Page 27 Event data recorder This vehicle is equipped with an event data recorder (EDR). The main pur- pose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
Page 28 ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained • In response to an official request by the police, a court of law or a govern- ment agency •...
Page 29 CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 30 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 32 Before driving 1-1. Key information 1-4. Opening and closing the windows and moon roof Keys........32 Power windows....115 1-2. Opening, closing and Moon roof......120 locking the doors 1-5. Refueling Smart entry & start system ......34 Opening the fuel Wireless remote control ..
Page 33: Keys
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without a smart entry & start system Master keys Operating the wireless remote control function (→P. 46) Valet keys Key number plate Vehicles with a smart entry & start system Electronic keys •...
Page 34 (without a smart entry & start system) or mechanical key (with a smart entry & start system) is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 554) ■...
Page 35: Smart Entry & Start System
1-2. Opening, closing and locking the doors ∗ Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks the doors (→P.
Page 36 Press the lock button to lock the doors. Pressing and holding the button closes the windows and moon roof. (This setting must be cus- tomized at your Toyota dealer.) Back door Press the unlock button to unlock the doors. The door cannot be unlocked for 3 seconds after the door is locked.
Page 37 1-2. Opening, closing and locking the doors Press the lock button to lock the doors. Antenna location and effective range ■ Antenna location Antennas outside cabin Antennas inside cabin Antenna outside luggage com- partment...
Page 38 1-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) of an outside door handle.
Page 39 1-2. Opening, closing and locking the doors ■ Operation signals A buzzer sound and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ■ Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situ- ations, the communication between the electronic key and the vehicle may be affected, preventing the smart entry &...
Page 40 1-2. Opening, closing and locking the doors ■ Switching the door unlock function It is possible to set which doors the entry function unlocks. STEP Turn the “ENGINE START STOP” switch OFF. STEP When the indicator on the key surface is turned off, press and hold (if equipped) for approximately 5 seconds while pressing on the key.
Page 41 1-2. Opening, closing and locking the doors ■ Battery-saving function In the following circumstances, the entry function is disabled in order to pre- vent the vehicle and electronic key batteries from discharging. ● When the entry function has not been used for 2 weeks or more ●...
Page 42 1-2. Opening, closing and locking the doors ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
Page 43 1-2. Opening, closing and locking the doors ■ Security feature If a door is not opened within approximately 30 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again. ■ Alarms and warning indicators A combination of exterior and interior alarms as well as warning lights and warning messages shown on the multi-information display are used to reduce the chance of vehicle theft and accidents resulting from erroneous operation.
Page 44 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The “ENGINE START STOP” switch was turned to ACCESSORY mode Turn the “ENGINE while the driver’s door was START STOP” switch open (or the driver’s door OFF and close the was opened while the Interior alarm driver’s door...
Page 45 1-2. Opening, closing and locking the doors Alarm Situation Correction procedure The electronic key has a Replace the electronic low battery key battery An attempt was made to Interior alarm start the engine without the Start the engine with pings once electronic key being the electronic key present, or the electronic...
Page 46 Radio waves could have unexpected effects on the operation of such medical devices. Ask your Toyota dealer for details for disabling the smart entry & start sys- tem.
Page 47: Wireless Remote Control
Unlocks all doors Opens the windows and moon roof (press and hold) Opens/closes back door (press and hold) Sounds alarm (press and hold) (→P. 134) : This setting must be cus- tomized at your Toyota dealer. : If equipped...
Page 48 1-2. Opening, closing and locking the doors ■ Operation signals ● Doors: A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice) ● Windows and moon roof: A buzzer sounds to indicate that the windows and moon roof are operating.
Page 49 When the wireless key has been left near an electrical appliance such as a personal computer Vehicles with a smart entry & start system →P. 38 ■ Customization that can be configured at Toyota dealer Settings (e.g. unlocking function) can be changed. (Customizable features →P. 593)
Page 50 1-2. Opening, closing and locking the doors CAUTION ■ When closing the windows or moon roof using wireless remote control Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window or moon roof is being operated.
Page 51: Side Doors
1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (if equipped) →P. 35 ■ Wireless remote control →P. 46 ■...
Page 52 1-2. Opening, closing and locking the doors ■ Door lock switch Locks all doors Unlocks all doors ■ Inside lock button Locks the door Unlocks the door Pulling the door handle can open the driver’s door even if the lock button is in the lock position.
Page 53 1-2. Opening, closing and locking the doors Locking the front doors from the outside without a key Move the inside lock button to the lock position. STEP Close the door while pulling the door handle. STEP Vehicles without a smart entry & start system The door cannot be locked if the key is in the engine switch.
Page 54 Using the mechanical key (Vehicles with a smart entry & start system) The doors can also be locked and unlocked with the mechanical key. (→P. 32) ■ Customization that can be configured at Toyota dealer Settings (e.g. unlocking function using a key) can be changed. (Customizable features →P. 593) CAUTION ■...
Page 55: Back Door (Lift-Up Type)
1-2. Opening, closing and locking the doors Back door (Lift-up type) The back door can be locked/unlocked and opened by the following procedures. ■ Locking and unlocking the back door Door lock switch →P. 50 Entry function →P. 34 Wireless remote control →P.
Page 56 1-2. Opening, closing and locking the doors ■ Opening the back door from inside the vehicle (if equipped) The power back door can be opened/closed using power back door switch or wireless remote control. (→P. 46) Push and hold the switch to close or open.
Page 57 1-2. Opening, closing and locking the doors When closing the back door ● Make sure that the lower side of the back door is closed before closing the upper side of the back door. ● Lower the back door using the back door handle, and make sure to push the back door down from the outside to close...
Page 58 1-2. Opening, closing and locking the doors ■ The power back door can be opened/closed when The back door can be opened automatically when the power back door main switch is on, and the following conditions are met. ● The power back door is unlocked (except closing operation) ●...
Page 59 1-2. Opening, closing and locking the doors ■ If the back door opener is inoperative The back door can be operated from the inside. Remove the cover on the back door trim. STEP Use a cloth to prevent scratches. Remove the screw and cover. (vehicles STEP without power back door) Push the lever for the back door motor, open the back door.
Page 60 While the power back door is opening automatically, applying excessive force to it will stop the opening operation to prevent the power back door from rapidly falling down. ■ Customization that can be configured at Toyota dealer Settings (e.g. switch operation) can be changed. (Customizable features →P. 593)
Page 61 1-2. Opening, closing and locking the doors CAUTION ■ While driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 62 1-2. Opening, closing and locking the doors CAUTION ■ Operating the back door Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. ● Remove any heavy loads, such as snow and ice, from the back door before opening it.
Page 63 When installing an accessory part to the back door, using a genuine Toyota part is recommended. ■ Back door closer (vehicles with power back door) ●...
Page 64 1-2. Opening, closing and locking the doors CAUTION ■ Power back door (vehicles with power back door) Observe the following precautions when operating the power back door. Failure to do so may cause death or serious injury. ● Check the safety of the surrounding area to make sure there are no obsta- cles or anything that could cause any of your belongings to get caught.
Page 65 When installing an accessory part to the back door, using a genuine Toyota part is recom- mended. ●...
Page 66 Do not touch the damper stay rod with gloves or other fabric items. ● Do not attach any accessories other Damper stay than genuine Toyota parts to the back door. ● Do not place your hand on the damper stay or apply lateral forces to it.
Page 67: Back Door (Double Type)
1-2. Opening, closing and locking the doors Back door (double type) The back door can be locked/unlocked and opened by the following procedures. ■ Locking and unlocking the back door Inside lock knob Locks the door Unlocks the door Wireless remote control →P.
Page 68 1-2. Opening, closing and locking the doors ■ Opening the back door from outside the vehicle Pull the handle STEP Open the left side door Pull the lever STEP Open the right side door...
Page 69 1-2. Opening, closing and locking the doors ■ Opening the back door from inside the vehicle Pull the handle STEP Open the left side door Pull the lever STEP Open the right side door...
Page 70 1-2. Opening, closing and locking the doors Back door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock This lock can be set to prevent children from opening the back door. Push down on the back door switch to lock the back door.
Page 71 1-2. Opening, closing and locking the doors CAUTION ■ While driving ● Keep the back door closed while driving. If the back door is left open, it may hit near-by objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard.
Page 72 ● Do not attach any accessories other than genuine Toyota parts to the back door. Doing so could cause the door to become heavy, which could inter- fere with opening/closing.
Page 73: Wheel Front Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever Seat cushion (front) angle adjustment knob Lumbar support control switch : If equipped on driver’s side ITY13C001...
Page 74 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Seat position fore/aft control switch Seatback angle control switch Seat cushion (front) angle control switch Vertical height control switch Lumbar support control switch (driver’s side only) Active head restraint (if equipped) When the occupant’s lower back presses against the seatback during a rear-end collision, the...
Page 75 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraint Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may make the inner struc- ture of the head restraint appear. This does not indicate a problem. During rear-end collision...
Page 76: Rear Seats
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats Second seat Seatback angle adjustment lever Seat position adjustment lever Third seat (with center seat) Third seat (without center seat)
Page 77 1-3. Adjustable components (seats, mirrors, steering wheel) Tumbling the second seats and third seat entry For easy access to the third seat, perform in “Tumbling the STEP second seats”. (→P. 77) ■ Before tumbling the second seats Stow the seat belt buckles and STEP lower the head restraints to the lowest position.
Page 78 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Tumbling the second seats Fold down the seatback while STEP pulling seatback angle adjustment lever, and swing the whole seat up and forward. Hook the holding strap to the STEP assist grip and secure the seat by pulling its free end.
Page 79 1-3. Adjustable components (seats, mirrors, steering wheel) Remove the seat hook covers STEP from the back of the seat cush- ion, and install them on the seat hooks. When returning the second seat to its original position, remove the seat hook covers from the floor and install them in the back of the ITY13C024 seat cushion.
Page 80 1-3. Adjustable components (seats, mirrors, steering wheel) Folding up the third seats ■ Before folding up the third seats Stow the seat belt buckles. STEP With center seat ITY13C018 Without center seat...
Page 81 1-3. Adjustable components (seats, mirrors, steering wheel) With center seat: Stow the center head restraint in the seat- STEP back. (→P. 93) STEP Pass the outer seat belts through the seat belt hangers and secure the seat belt plates. This prevents the shoulder belt from being damage.
Page 82 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Folding up the third seats Fold down the head restraints STEP while pulling the head restraint angle levers. ITY13C022 Push the seatback angle levers STEP and fold the third seatbacks. Pull the seat leg lock release STEP levers.
Page 83 1-3. Adjustable components (seats, mirrors, steering wheel) Secure the seats by the strikers. STEP Remove the seat hook covers STEP from the back of the seat cush- ion, and install them on the seat hooks. ITY13C030 ■ Returning the third seats Remove the seat hook covers STEP from the floor and install them...
Page 84 1-3. Adjustable components (seats, mirrors, steering wheel) Secure the seats by the strikers. STEP Pull the handle and raise the STEP seatbacks. Fix the handle securely in its orig- inal position after use. Raise the head restraints. STEP...
Page 85 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat adjustment Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt. If the seat is too reclined, during an accident the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury.
Page 86: Driving Position Memory System
1-3. Adjustable components (seats, mirrors, steering wheel) ∗ Driving position memory system Your preferred driving position (the position of the driver’s seat, steering wheel and outside rear view mirrors) can be entered into the computer’s memory and recalled with the touch of a button. It is also possible to set this function to activate automatically when the doors are unlocked.
Page 87 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Recalling the memorized position Check that the shift lever is set in “P”. Turn the “ENGINE START STOP” switch to IGNITION ON STEP mode. Press button “1”, “2” or “3” to STEP recall the desired position.
Page 88 1-3. Adjustable components (seats, mirrors, steering wheel) Linking driving position memory with door unlock operation Record your driving position to button “1”, “2” or “3” before performing the following: Using the wireless remote control Turn the “ENGINE START STOP” switch to OFF after closing STEP the driver’s door.
Page 89 1-3. Adjustable components (seats, mirrors, steering wheel) Using the door lock switch Carry only the key to which you want to link the driving position. If 2 or more keys are in the vehicle, the driving position cannot be linked properly. Turn the “ENGINE START STOP”...
Page 90 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Retained accessory power ● Each memorized position (except for the steering wheel position) can be activated within 3 minutes after the driver’s door is opened, even if the “ENGINE START STOP” switch is turned off. ●...
Page 91: Head Restraints
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Front seats Vertical adjustment Down Push the head restraint up or down while pressing the lock release button. Lock release button Angle adjustment (if equipped) Second seats Vertical adjustment Pull the head restraint up. Down Press hold...
Page 92 1-3. Adjustable components (seats, mirrors, steering wheel) Third outboard seats To fold Pull the head restraint angle lever to fold the head restraint. ITY13C040 ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
Page 93 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Removing the head restraints Front seats Push a flathead screwdriver into the slot. STEP The slot is located on the right side of the right head restraint anchor. STEP While pressing in the flathead screwdriver, pull up the head restraint. Second seats Pull the head restraint up while pressing the lock release button.
Page 94 1-3. Adjustable components (seats, mirrors, steering wheel) Third outboard seats Push a flathead screwdriver into the slot. STEP The slot is located on the left side of the left head restraint anchor. ITY13C035 STEP While pressing in the flathead screwdriver, pull up the head restraint. ■...
Page 95: Seat Belts
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 96 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Fastening and releasing the third center seat belt (if equipped) Pull out the tab STEP ITY13C120 Push tab B into buckle B until STEP a clicking sound is heard Tab B Buckle B Push tab A into buckle A until STEP a clicking sound is heard...
Page 97 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Releasing and storing the third center seat belt (if equipped) Push the release button on STEP buckle A Buckle A Push either the mechanical STEP key or tab A into buckle B When releasing and storing the seat belt, hold the belt while winding it back gently.
Page 98 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the belt (front and second outboard seats) Down Move the height adjuster up and down as needed until you hear a click. ITY13C054 Seat belt pretensioners (front and second outboard seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt...
Page 99 1-3. Adjustable components (seats, mirrors, steering wheel) Pre-crash seat belts (front seats of vehicles with pre-crash safety system) If the system determines that a collision is unavoidable, the front seat belts will retract before the collision. (→P. 319) ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact.
Page 100 ■ Seat belt regulations If seat belt regulations exist in the country where you reside, please contact your Toyota dealer for seat belt replacement or installation.
Page 101 Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children. ● Toyota recommends that children be seated in the rear seat and always use a seat belt and/or an appropriate child restraint system. ●...
Page 102 Seat belt pretensioners If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer. ■ Adjustable shoulder anchor Always make sure the shoulder belt is positioned across the center of your shoulder.
Page 103 ● Ensure that the belt and tab are locked and the belt is not twisted. If the seat belt does not function correctly, immediately contact your Toyota dealer. ● Replace the seat assembly, including the belts, if your vehicle has been involved in a serious accident, even if there is no obvious damage.
Page 104 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ For Australian owners Observe the following additional WARNINGS. WARNING: Seatbelts are designed to bear upon the bony structure of the body, and should be worn low across the front of the pelvis or the pelvis, chest and shoulders, as applicable;...
Page 105: Steering Wheel
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel Manual tilt & telescopic steering wheel (Type A) The steering wheel can be adjusted to a comfortable position. ■ To change the angle Hold the steering wheel and pull the lever down. ■...
Page 106 1-3. Adjustable components (seats, mirrors, steering wheel) Manual tilt & telescopic steering wheel (Type B) The steering wheel can be adjusted to a comfortable position. ■ To change the angle Hold steering STEP wheel and pull the lock release lever toward you.
Page 107 1-3. Adjustable components (seats, mirrors, steering wheel) Power tilt & telescopic steering wheel The steering wheel can be adjusted to a comfortable position while the “ENGINE START STOP” switch is in ACCESSORY or IGNI- TION ON mode. Down Toward the driver Away from the driver Auto tilt away (vehicles with power tilt &...
Page 108 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Automatic adjustment of the steering position A desired steering position can be entered to memory and recalled automat- ically by the driving position memory. (→P. 85) CAUTION ■ While driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury.
Page 109: Anti-Glare Inside Rear View Mirror
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view in accordance with the driver’s seating posture. Adjusting the height of the rear view mirror Adjust the height of the rear view mirror by moving it up and down.
Page 110 1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare function Manual anti-glare inside rear view mirror Reflected light from the headlights of vehicles behind can be reduced by operating the lever. Normal position Anti-glare position Auto anti-glare inside rear view mirror Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced.
Page 111 1-3. Adjustable components (seats, mirrors, steering wheel) ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. ITY13C080 CAUTION ■ While driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 112: Outside Rear View Mirrors
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted Manually-adjustable type Adjust the mirror up, down, in or out by pushing the mirror surface. Power-adjustable type Select a mirror to adjust STEP Left Right Adjust the mirror STEP...
Page 113 1-3. Adjustable components (seats, mirrors, steering wheel) Folding back the mirrors Manual type Push backward to fold the mir- rors. Power type Press the switch Pressing again will extend the mirrors.
Page 114 1-3. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when (with power-adjustable type only) Vehicles without a smart entry & start system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart entry & start system The “ENGINE START STOP”...
Page 115 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ While driving Observe the following precautions. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. ● Do not adjust the mirrors while driving.
Page 116: Power Windows
1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. Type A Closing One-touch closing (driver’s window only) Opening One-touch opening (driver’s window only) : To stop the window partway, operate the switch in the oppo- site direction.
Page 117 1-4. Opening and closing the windows and moon roof Lock switch Press the switch down to lock passenger window switches. Use this switch to prevent chil- dren from accidentally opening or closing a passenger window.
Page 118 The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Door lock linked window operation (if equipped) The following functions can be used if customized at your Toyota dealer. ● The power windows can be opened and closed using the wireless remote control or mechanical key.
Page 119 If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. ■ Customization that can be configured at Toyota dealer Settings (e.g. linked door lock operation) can be changed. (Customizable features →P. 593)
Page 120 1-4. Opening and closing the windows and moon roof CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated.
Page 121: Moon Roof
1-4. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing Open Stops just before it is opened fully. Press the switch again to fully open.
Page 122 The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Door lock linked moon roof operation (if equipped) The following functions can be used if customized at your Toyota dealer. ● The moon roof can be opened and closed using the wireless remote con- trol or mechanical key.
Page 123 Check to make sure that the moon roof is com- pletely closed and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer.
Page 124 An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the “ENGINE START STOP” switch OFF. ■ Customization that can be configured at Toyota dealer Setting (e.g. linked door lock operation) can be changed. (Customizable features →P. 593) CAUTION ■...
Page 125: Opening The Fuel Tank Cap
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle ● Vehicles without a smart entry & start system: Turn the engine switch off and ensure that all the doors and windows are closed.
Page 126 1-5. Refueling ■ Opening the fuel tank cap Pull the lever. STEP Turn the fuel tank cap slowly STEP to open. Hang the fuel tank cap on the STEP back of the fuel filler door.
Page 127 ■ Use of ethanol blended gasoline in a gasoline engine Toyota allows the use of ethanol blended gasoline where the ethanol con- tent is up to 10 %. Make sure that the ethanol blended gasoline to be used has a Research Octane Number that follows the above.
Page 128 ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Failure to do so may cause a fire or other incident which may result in death or serious injury.
Page 129 1-5. Refueling NOTICE ■ Refueling Do not spill fuel during refueling. Failure to do so may damage the vehicle, such as causing the exhaust sys- tems to operate abnormally or damaging fuel system components or the vehicle’s painted surface.
Page 130: Engine Immobilizer System
1-6. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. Vehicles with navigation system Vehicles without a smart entry &...
Page 131 1-6. Theft deterrent system Vehicles without navigation system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the key is in contact with a metallic object ●...
Page 132: Alarm
1-6. Theft deterrent system ∗ Alarm The system sounds the alarm and flashes lights when forcible entry is detected. ■ Triggering of the alarm The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked or opened in any way other than by using the entry function, the wireless remote control or using the key.
Page 133 1-6. Theft deterrent system Vehicles without navigation system ■ Deactivating or stopping the alarm Do one of the following to deactivate or stop the alarm. ● Unlock the doors. ● Vehicles without a smart entry & start system: Turn the engine switch to “ACC”...
Page 134 1-6. Theft deterrent system ■ Triggering of the alarm The alarm may be triggered in the following situations. (Stopping the alarm deactivates the alarm system.) ● A person inside the vehicle opens a door or hood. ● The battery is disconnected.
Page 135 1-6. Theft deterrent system ■ When the battery is disconnected Be sure to cancel the alarm system. If the battery is disconnected before canceling the alarm, the system may be triggered when the battery is reconnected. ■ Alarm-operated door lock ●...
Page 136: Safety Information Correct Driving Posture
1-7. Safety information Correct driving posture Drive with a good posture as follows: Sit upright and well back in the seat. (→P. 72) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 137 1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.
Page 138: Srs Airbags
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 139 1-7. Safety information Side and curtain shield airbags Side airbags Can help protect the torso of the front seat occupants. Side airbags (if equipped) Can help protect the torso of the second outboard seat occu- pants. Curtain shield airbags ● Can help protect primarily the head of front seat occupants. ●...
Page 140 1-7. Safety information Airbag system components Side airbags (if equipped Knee airbags (if equipped) on second outboard seats) Front passenger airbag Side impact sensors (rear) Front impact sensors Side airbags (front seats) Airbag sensor assembly Curtain shield airbags Roll sensing curtain Driver’s seat belt buckle shield airbags off switch...
Page 141 1-7. Safety information ■ If the SRS airbags deploy (inflate) ● Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. ● A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, second seats, and parts of the front, side and rear pillars, and roof side rail, may be hot for several minutes.
Page 142 1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. ●...
Page 143 1-7. Safety information ■ Types of collisions that may not deploy the SRS airbag (vehicles with side airbags and curtain shield airbags) The SRS side airbag (if equipped) and curtain shield airbag may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compart- ment.
Page 144 1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or...
Page 145 1-7. Safety information ● Vehicles with knee airbags: The pad section of the steering wheel, dash- board near the front passenger airbag or lower portion of the instrument panel is scratched, cracked, or otherwise damaged. ● Vehicles without knee airbags: The pad section of the steering wheel, dash- board near the front passenger airbag is scratched, cracked, or otherwise...
Page 146 1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly.
Page 147 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are safer for infants and children than the front passenger seat.
Page 148 1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not lean against the door, the roof side rail or the front, center and rear pil- lars. ● Do not allow anyone to kneel on the passenger seat toward the door or put their head or hands outside the vehicle.
Page 149 Wash off any residue as soon as possible to prevent skin irritation. ● If the areas where the SRS airbags are stored, such as the steering wheel pad and front, center and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer.
Page 150 Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
Page 151 1-7. Safety information Deactivating the curtain shield airbags in a vehicle rollover ON/OFF (hold for a few sec- onds) Vehicles without a smart entry & start system: The RSCA OFF indicator turns on (only when the engine switch is in the ON position.) The roll sensing function for the curtain shield airbags and seat...
Page 152 1-7. Safety information ■ This switch only should be used In a situation where the inflation is not desired (such as during extreme off road driving). ■ Operating conditions when the RSCA OFF indicator is on ● The curtain shield airbag and seat belt pretensioner will not activate in a vehicle rollover.
Page 153: Child Restraint Systems
General installation instructions are provided in this manual. (→P. 161) ● If child restraint system regulations exist in the country where you reside, please contact your Toyota dealer for the child restraint sys- tem information. ● Toyota recommends that you use a child restraint system which conforms to the regulation “ECE No.44”.
Page 154 1-7. Safety information Baby seat (Infant seat) Equal to Group 0 and 0 of “ECE No.44” Child seat (Convertible seat) Equal to Group 0 and I of “ECE No.44” Junior seat (Booster seat) Equal to Group II and III of “ECE No.44”...
Page 155 1-7. Safety information Child restraint system suitability for various seating positions Provided information in the table shows your child restraint system suitability for various seating positions. Seating Second seat Third seat Front position passenger Center (if Mass Outside Center Outside seat equipped) groups...
Page 156 UF: Suitable for forward-facing “universal” category child restraint system approved for the use in this mass group. L1: Suitable for “TOYOTA BABY SAFE (0 to 13 kg [0 to 28 lb.])” approved for the use in this mass group L2: Suitable for “TOYOTA DUO (9 to 18 kg [20 to 39 lb.])” approved for the use in this mass group L3: Suitable for “TOYOTA KID (15 to 36 kg [34 to 79 lb.])”...
Page 157 1-7. Safety information Child restraint system suitability for various seating positions (with ISOFIX rigid anchor) Provided information in the table shows your child restraint system suitability for various seating positions. Vehicle ISOFIX positions Mass groups Size class Fixture Second seat Outside ISO/L1 Carrycot...
Page 158 1-7. Safety information (1) For the child restraint system which do not carry the ISO/XX size class identification (A to G), for the applicable mass group, the car manufacturer shall indicate the vehicle specific ISOFIX child restraint system(s) recommended for each position Key of letters inserted in the above table: IUF: Suitable for ISOFIX forward-facing child restraint systems of uni- versal category approved for use in this mass group...
Page 159 1-7. Safety information ■ When installing the child restraint system on the front passenger seat When you have to use a child restraint system on the front passenger seat, adjust the following: ● The seatback to the most upright position ●...
Page 160 ● Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.
Page 161 1-7. Safety information CAUTION ■ When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death.
Page 162: Installing Child Restraints
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure the child restraints using a seat belt or ISOFIX rigid anchor (ISOFIX child restraint system). Attach the top strap when installing a child restraint. Seat belts equipped with a child restraint locking mecha- nism (ALR/ELR belts except driver’s seat belt)
Page 163 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear-facing  Baby seat (infant seat)/child seat (convertible ■ seat) Fold the seatback while pulling STEP the seatback angle lever. Return the seatback and secure it at the first lock position.
Page 164 1-7. Safety information Fully extended the shoulder belt STEP and then allow it to retract slightly in order to activate the ALR lock mode. Lock mode allows the seat belt to retract only. While pushing the child restraint STEP system down into the seat, allow the shoulder belt to retract until the child restraint system is securely in place.
Page 165 1-7. Safety information Forward-facing  Child seat (convertible seat) ■ Fold the seatback while pulling STEP the seatback angle lever. Return the seatback and secure it at the first lock position. (→P. 72) Place the child restraint system STEP on the second or third seat fac- ing the front of the vehicle.
Page 166 1-7. Safety information Fully extend the shoulder strap STEP and then allow it to retract slightly into the ALR lock mode. Lock mode allows the seat belt to retract only. While pushing the child restraint STEP system into the seat, allow the shoulder belt to retract until the child restraint system is securely in place.
Page 167 1-7. Safety information ■ Junior seat (booster seat) Fold the seatback while pulling STEP the seatback angle lever. Return the seatback and secure it at the first lock position. Place the child restraint system STEP on the seat facing the front of the vehicle.
Page 168 1-7. Safety information Removing a child restraint system installed with a seat belt Press the buckle release button and fully retract the seat belt. Installation with ISOFIX rigid anchor (ISOFIX child restraint sys- tem) Fold the seatback forward and STEP then back to the 1st lock position (most upright position) until it locks into place.
Page 169 1-7. Safety information Check the positions of the exclu- STEP sive fixing bars, and install the child restraint system to the seat. The bars are installed in the clearance between the seat cush- ion and seatback. If the child restraint system has a top strap, the top strap should be latched onto the anchors.
Page 170 1-7. Safety information Using the child restraint anchor fitting Secure the child restraint system using a seat belt or ISOFIX STEP rigid anchors, and do the following. Outside Adjust the head restraint to the upmost position. ITY17C080 Center (Type A) Lower the head restraint to the lowest position.
Page 171 Follow the instructions provided by the manufacturer of the system. If your child restraint system does not provide a locking clip, you can purchase the following item from your Toyota dealer. Locking clip for child restraint system (Part No. 73119-22010)
Page 172 1-7. Safety information CAUTION ■ When installing a junior (booster) seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode: (→P. 98) ALR mode causes the belt to tighten only which could cause injury or dis- comfort to the child.
Page 173 1-7. Safety information CAUTION ■ When installing a child restraint system ● Extreme Hazard! Do not use a rear- ward facing child restraint on a seat protected by an airbag in front of it! This is because the force of the rapid infla- tion of the front passenger airbag can cause death or serious injury to the child.
Page 174 When installing a child restraint system ● If child restraint system regulations exist in the country where you reside, please contact your Toyota dealer for the child restraint system informa- tion. ● When a junior (booster) seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder.
Page 175 1-7. Safety information...
Page 176 Cruise control....240 Engine (ignition) switch Dynamic radar cruise (vehicles without a smart control......244 entry & start system)..189 Toyota parking Engine (ignition) switch assist-sensor ....258 (vehicles with a smart Four-wheel drive entry & start system)..193 system ......269 Automatic transmission ..
Page 177: Driving The Vehicle
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine (→P. 193) ■ Driving With the brake pedal depressed, shift the shift lever to “D”. STEP (→P. 198) Release the parking brake. (→P.
Page 178 Drum-in-disc type parking brake system Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodi- cally or whenever the parking brake shoes and/or drums are replaced. Have your Toyota dealer perform the bedding-down.
Page 179 2-1. Driving procedures ■ Idling time before engine stop (diesel engine) To prevent damage to the turbocharger, allow the engine to idle immediately after high-speed driving or hill climbing. Driving condition Idling time Normal city driving Not necessary Constant speed of approx. Approximately 20 80 km/h (50 mph) seconds...
Page 180 2-1. Driving procedures ■ Eco Driving Indicator Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), Eco Driving Indicator Light will turn on. Eco Driving Indicator Zone Display (if equipped) Suggests Zone of Eco driving with current Eco driving ratio based on acceleration.
Page 181 If the smell of exhaust is noticed inside the vehicle, open the windows and check that the back door is closed. Large amounts of exhaust in the vehi- cle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately.
Page 182 2-1. Driving procedures CAUTION ● Do not shift the shift lever to “P” while the vehicle is moving. Doing so can damage the transmission and may result in a loss of vehicle control. ● Do not shift the shift lever to “R” while the vehicle is moving forward. Doing so can damage the transmission and may result in a loss of vehicle control.
Page 183 ■ If you hear a squealing or scraping noise (brake pad wear indicators) Have your Toyota dealer check and replace the brake pads as soon as pos- sible. Rotor damage may result if the pads are not replaced when needed.
Page 184 2-1. Driving procedures CAUTION ■ When the vehicle is stopped ● Do not race the engine. If the vehicle is in any gear other than “P” or “N”, the vehicle may acceler- ate suddenly and unexpectedly, and may cause an accident. ●...
Page 185 2-1. Driving procedures CAUTION ■ When the vehicle is parked ● Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun. Failure to do so may result in the following: •...
Page 186 The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 187 2-1. Driving procedures CAUTION ■ When braking the vehicle ● When the brakes are wet, drive more cautiously. Braking distance increases when the brakes are wet, and may cause one side of the vehicle to brake differently than the other side. Also the parking brake may not securely hold the vehicle.
Page 188 2-1. Driving procedures NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque. ● Do not use the accelerator pedal or depress accelerator and brake pedals together to hold the vehicle on a hill.
Page 189 Short in electrical components ● Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. ● Brake function ●...
Page 190: Engine (Ignition) Switch
2-1. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) ■ Starting the engine Gasoline engine Check that the parking brake is set. STEP Check that the shift lever is set in “P”. STEP Firmly depress the brake pedal. STEP Turn the engine switch to the “START”...
Page 191 2-1. Driving procedures ■ Changing the engine switch positions “LOCK” The steering wheel is locked and the key can be removed. (The key can be removed only “ ” when the shift lever is in “ACC” Some electrical components such as the audio system can be used.
Page 192 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (→P. 129) Contact your Toyota dealer. ■ Key reminder function A buzzer sounds if the driver’s door is opened while the engine switch is in...
Page 193 Do not crank the engine for more than 30 seconds at a time. This may overheat the starter and wiring system. ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately.
Page 194 2-1. Driving procedures Engine (ignition) switch (vehicles with a smart entry & start system) Performing the following operations when carrying the electronic key on your person starts the engine or changes “ENGINE START STOP” switch modes. ■ Starting the engine Check that the parking brake is set.
Page 195 2-1. Driving procedures ■ Changing “ENGINE START STOP” switch mode Modes can be changed by pressing the “ENGINE START STOP” switch with the brake pedal released. (The mode changes each time the switch is pressed.) Emergency flashers can be used. ACCESSORY mode Some electrical components such as the audio system can...
Page 196 ■ If the engine does not start The engine immobilizer system may not have been deactivated. (→P. 129) Contact your Toyota dealer. ■ When the “ENGINE START STOP” switch indicator flashes in amber The system may be malfunctioning. Have the vehicle inspected by your...
Page 197 2-1. Driving procedures ■ Auto power off function If the vehicle is left in ACCESSORY mode for more than 20 minutes with the shift lever in P, the “ENGINE START STOP” switch will automatically turn off. However, this function cannot entirely prevent battery discharge. Do not leave the vehicle with the “ENGINE START STOP”...
Page 198 ● Do not race a cold engine. ● If the engine becomes difficult to start or stalls frequently, have your vehi- cle checked by your Toyota dealer immediately. ■ Symptoms indicating a malfunction with the “ENGINE START STOP” switch If the “ENGINE START STOP” seems to be operating somewhat differently than usual, such as the switch sticking slightly, there may be a malfunction.
Page 199: Automatic Transmission
2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever While the “ENGINE START STOP” switch is in IGNITION ON mode, depress the brake pedal and move the shift lever.
Page 200 2-1. Driving procedures ■ Shift position uses Shift position Function Parking the vehicle or starting the engine Reversing Condition in which the power is not transmitted Normal driving “S” mode driving (→P. 201) : Shifting to the “D” position allows the system to select a gear suitable for the driving conditions.
Page 201 2-1. Driving procedures ■ Selecting a driving mode The following patterns can be selected to suit current driving and operating conditions. Power mode For powerful acceleration and driving mountainous regions. Normal mode For normal driving. Second start mode For starting on slippery road surfaces, such as on snow.
Page 202 2-1. Driving procedures Changing shift ranges in “S” mode Shift the shift lever to the “S” position and operate the shift lever. Upshifting Downshifting Optitron type meters Non-Optitron type meters The initial shift range in “S” mode is automatically set to “5” or “4” according to the vehicle’s speed.
Page 203 2-1. Driving procedures ■ Shift ranges and their functions ● Automatically selecting gears between 1 and 6 according to vehicle speed and driving conditions. But, the gear is limited according to selected shift range. ● You can choose from 6 levels of engine braking force. ●...
Page 204 If the “S” indicator does not come on even after shifting the shift lever to “S” This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the vehicle will operate as if the shift lever is in “D”.) ■...
Page 205: Turn Signal Lever
2-1. Driving procedures Turn signal lever Left turn Right turn Move and hold the lever partway to signal a lane change. The left hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 206: Parking Brake
2-1. Driving procedures Parking brake Sets the parking brake Fully set the parking brake while depressing the brake pedal. Releases the parking brake Slightly raise the lever and lower it completely while press- ing the button. ■ Usage in winter time →P.
Page 207: Horn
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel (vehicles with manual tilt and tele- scopic steering wheel) Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 208: Instrument Cluster Gauges And Meters
2-2. Instrument cluster Gauges and meters Non-Optitron type meters Optitron type meters...
Page 209 2-2. Instrument cluster Tachometer Displays the engine speed in revolutions per minute Engine coolant temperature gauge Displays the engine coolant temperature Fuel gauge Displays the quantity of fuel remaining in the tank Speedometer Displays the vehicle speed Odometer/trip meter display change button Switches between odometer and trip meter displays Instrument panel light control dial (Optitron type meters only) The brightness of the instrument panel light can be adjusted...
Page 210 2-2. Instrument cluster Switching the display Non-Optitron type meters Pressing this button switches between odometer, trip meter and instrument cluster light control displays (when the headlight switch is on). Odometer Trip meter A Trip meter B Instrument cluster light con- trol display : Pushing and holding the button will reset the trip meter.
Page 211 2-2. Instrument cluster Eco Driving Indicator Light customization Eco Driving Indicator Light can activated or deactivated. While the odometer is being displayed, press and hold the STEP odometer/trip meter display change button to display the Eco Driving Indicator Light customization screen. Non-Optitron type meters Optitron type meters Press the odometer/trip meter display change button to set...
Page 212 2-2. Instrument cluster Instrument cluster light control (Optitron type meters) The brightness of the instrument cluster light can be adjusted. Darker Brighter ■ The meters and display illuminate when (Optitron type meters) The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 213 When the oil pressure drops even though the engine oil amount has not decreased, or if the oil pressure does not increase when engine oil is added, contact your Toyota dealer, as there may be a problem with the lubrication system.
Page 214: Indicators And Warning Lights
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. For the purpose of explanation, the following illustration displays all indicators and warning lights illuminated.
Page 215 2-2. Instrument cluster Center panel (vehicles with navigation system) Center panel (vehicles without navigation system)
Page 216 2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator “PWR” mode indicator (→P. 204) (→P. 200) (if equipped) Automatic transmission Headlight high beam second start indicator indicator (→P. 224) (→P.
Page 217 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer. : The light flashes to indicate that the system is operating.
Page 218 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 219: Multi-Information Display
● Turn-by-turn navigation (vehicles with a navigation system) (→P. 220) ● Front tire angle (→P. 220 ● Toyota parking assist -sensor display (if equipped) (→P. 258) Automatically displayed when using Toyota parking assist-sensor. ● Dynamic radar cruise control display (if equipped) (→P.
Page 220 2-2. Instrument cluster ● Shift position and shift range (→P. 198) Displays the selected shift position or selected shift range. ● Warning messages (→P. 518) Automatically displayed when a malfunction occurs in one of the vehi- cle’s system.
Page 221 2-2. Instrument cluster Switch the display Display items can be switched by pressing the “DISP” switch. Display items ■ Average fuel consumption and Eco Driving Indicator Zone Display (→P. 179) Displays the average fuel consumption since the function was reset •...
Page 222 2-2. Instrument cluster ■ Current fuel consumption Displays the current rate of fuel consump- tion ■ Driving range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining • This distance is computed based on your average fuel consumption.
Page 223 2-2. Instrument cluster ■ Average vehicle speed Displays the average vehicle speed since the engine was started or the function was reset The function can be reset by pressing the “DISP” switch for longer than 1 second when the average vehicle speed is displayed. ■...
Page 224 ■ System check display After turning the “ENGINE START STOP” switch to IGNITION ON mode, “LAND CRUISER” is displayed while system operation is checked. When the system check is complete, the normal screen will return. ■ Turn-by-turn navigation (vehicles with navigation system)
Page 225: Headlight Switch
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. The front position, tail, license plate instrument panel lights turn on. The headlights and all lights listed above turn The headlights and all lights listed above turn (if equipped) on and off automati- cally.
Page 226 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 227 2-3. Operating the lights and wipers ■ Daytime running light system (if equipped) ● To make your vehicle more visible to other drivers, the front position lights turn on automatically (at an increased intensity) whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night.
Page 228 2-3. Operating the lights and wipers ■ Automatic headlight leveling system (if equipped) The level of the headlights is automatically adjusted according to the number of passengers and the loading condition of the vehicle to ensure that the headlights do not interfere with other road users. ■...
Page 229: Fog Light Switch
2-3. Operating the lights and wipers ∗ Fog light switch The fog lights assist visibility in difficult driving conditions, such as in rain or fog. The fog lights can be used when the headlights or parking lights are turned on. Turns the fog lights off Turns the fog lights on ∗...
Page 230: Windshield Wipers And Washer
2-3. Operating the lights and wipers Windshield wipers and washer Without intermittent type The wiper operation is selected by moving the lever as follows. Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Washer operation...
Page 231 2-3. Operating the lights and wipers With intermittent type The wiper operation is selected by moving the lever as follows. Intermittent windshield wiper operation Low speed windshield wiper operation High speed windshield wiper operation Temporary operation Washer/wiper dual opera- tion Wipers operate automatically.
Page 232 2-3. Operating the lights and wipers Intermittent wiper with interval adjuster Wiper intervals can be adjusted for intermittent operation (when “INT” is selected). Intermittent wiper operation Low speed wiper operation High speed wiper operation Temporary operation...
Page 233 2-3. Operating the lights and wipers Decreases the intermittent windshield wiper frequency Increases the intermittent windshield wiper frequency Washer/wiper dual opera- tion Wipers operate automatically.
Page 234 2-3. Operating the lights and wipers Rain-sensing windshield wipers With “AUTO” selected, the wipers will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume and vehicle speed. Rain-sensing wiper opera- tion Low speed wiper operation High speed wiper operation...
Page 235 2-3. Operating the lights and wipers Decreases the sensitivity Increases the sensitivity Washer/wiper dual opera- tion Wipers operate automatically. (After operating several times, the wipers operate one more time after a short delay to pre- vent dripping.) If the headlights are on, the headlight cleaners will operate once.
Page 236 2-3. Operating the lights and wipers ■ The windshield wiper and washer can be operated when Vehicles without a smart entry & start system The engine switch is in the “ON” position. Vehicles with a smart entry & start system The “ENGINE START STOP”...
Page 237 2-3. Operating the lights and wipers CAUTION ■ Caution regarding the use of windshield wipers in “AUTO” mode (vehi- cles with rain-sensing windshield wipers) The windshield wipers may operate unexpectedly if the sensor is touched or the windshield is subject to vibration in “AUTO” mode. Take care that your fingers or anything else do not become caught in the windshield wipers.
Page 238: Rear Window Wiper And Washer
2-3. Operating the lights and wipers ∗ Rear window wiper and washer Without intermittent type Normal window wiper oper- ation Washer/wiper dual opera- tion Washer operation ∗ : If equipped...
Page 239 2-3. Operating the lights and wipers With intermittent type Intermittent window wiper operation Normal window wiper oper- ation Washer/wiper dual opera- tion Washer operation ■ The rear window wiper and washer can be operated when Vehicles without a smart entry & start system The engine switch is in the “ON”...
Page 240: Headlight Cleaner Switch
2-3. Operating the lights and wipers ∗ Headlight cleaner switch Washer fluid can be sprayed on the headlights. Press the switch to clean the headlights. ITY23C040 ■ The headlight cleaner can be operated when Vehicles without a smart entry & start system The engine switch is in the “ON”...
Page 241: Using Other Driving Systems Cruise Control
2-4. Using other driving systems ∗ Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch ■ Setting the vehicle speed Press the “ON-OFF” button to STEP activate the cruise control. Cruise control indicator will come on.
Page 242 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 243 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
Page 244 2-4. Using other driving systems CAUTION ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 245: Dynamic Radar Cruise Control
2-4. Using other driving systems ∗ Dynamic radar cruise control Dynamic radar cruise control supplements conventional cruise con- trol with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehi- cles ahead.
Page 246 2-4. Using other driving systems ■ Setting the vehicle speed (vehicle-to-vehicle distance con- trol mode) Press the “ON-OFF” button to STEP activate the cruise control. Dynamic radar cruise control indicator will come on. Press the button again to deactivate the cruise control. Accelerate or decelerate to STEP the desired speed, and push...
Page 247 2-4. Using other driving systems ■ Adjusting the set speed To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 248 2-4. Using other driving systems ■ Changing the vehicle-to-vehicle distance Pressing the button changes Preceding vehicle mark vehicle-to-vehicle dis- tance as follows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when “ENGINE START STOP” switch is turned to IGNITION ON mode.
Page 249 2-4. Using other driving systems ■ Vehicle-to-vehicle distance settings Select a distance from the table below. Note that the distances shown correspond to a vehicle speed of 80 km/h (50 mph). Vehi- cle-to-vehicle distance increases/decreases in accordance with vehicle speed. Distance options Vehicle-to-vehicle distance Long...
Page 250 2-4. Using other driving systems Driving in vehicle-to-vehicle distance control mode This mode employs a radar sensor to detect the presence of vehicles up to approximately 120 m (400 ft.) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Page 251 2-4. Using other driving systems Example of follow-up cruising When following a vehicle driving slower than the set speed The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle dis- tance set by the driver.
Page 252 2-4. Using other driving systems Selecting conventional constant speed control mode Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed control mode is selected, your vehicle will maintain a set speed regardless of whether or not there are other vehicles in the lane ahead.
Page 253 The switching operation continues for 5 seconds or more after the center differential lock switch has been operated. If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
Page 254 2-4. Using other driving systems ■ Automatic cancelation of constant speed control The cruise control will stop maintaining the vehicle speed in the following sit- uations. ● Actual vehicle speed is more than approximately 16 km/h (10 mph) below the set vehicle speed. At this time, the memorized set speed is not retained.
Page 255 2-4. Using other driving systems CAUTION ■ Before using dynamic radar cruise control Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set speed. If automatic deceleration/acceleration is not appropriate, adjust the vehicle speed, as well as the distance between your vehicle and vehicles ahead by applying the brakes, etc.
Page 256 2-4. Using other driving systems CAUTION ■ Situations unsuitable for dynamic radar cruise control Do not use dynamic radar cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 257 2-4. Using other driving systems CAUTION ■ When the sensor may not be correctly detecting the vehicle ahead Apply the brakes as necessary when any of the following types of vehicles are in front of you. As the sensor may not be able to correctly detect these types of vehicles, the approach warning (→P.
Page 258 If the sensor moves even slightly off position, the system may malfunction. If the sensor or surrounding area is subject to a strong impact, always have the area inspected and adjusted by a Toyota dealer. ● Do not disassemble the sensor.
Page 259: Toyota Parking Assist-Sensor
■ Sensor types Front corner sensors Rear corner sensors Rear center sensors ■ Toyota parking assist-sensor switch On/off To turn the system on, press the switch. The indicator light comes on and the buzzer sounds to inform the driver that the system is operational.
Page 260 Rear center sensor detec- tion ■ Touch screen (vehicles with a navigation system) When the Toyota parking assist monitor or Multi-ter- rain Monitor is not displayed The graphic is automatically displayed when an obstacle is detected. The screen can be set so that the graphic is not →...
Page 261 2-4. Using other driving systems Sensor detection display, obstacle distance ■ Corner sensors Multi- Touch screen Approximate information distance to obstacle Insert display display Front: 50 cm (1.6 ft.) to 37.5 cm (1.2 ft.) Rear: 60 cm (2.0 ft.) to (continuous) (blinking) (continuous)
Page 262 2-4. Using other driving systems ■ Rear center sensors Approximate distance Multi-information Touch screen to obstacle display (insert display) 150 cm (4.9 ft.) to 80 cm (2.6 ft.) (blinking slowly) (continuous) 80 cm (2.6 ft.) to 65 cm (2.1 ft.) (blinking) (continuous) 65 cm (2.1 ft.) to...
Page 263 2-4. Using other driving systems ■ Buzzer operation and distance to an obstacle A beep sounds when the corner sensors and rear center sensors are operating. ● The buzzer beeps faster as the vehicle approaches an obstacle. When the vehicle comes within the following distance of the obsta- cle, the buzzer sounds continuously: •...
Page 264 2-4. Using other driving systems Detection range of the sensors Approximately 60 cm (2.0 ft.) Approximately 150 cm (4.9 ft.) Approximately 50 cm (1.6 ft.) The diagram shows the detection range of the sensors. Note that the sensors cannot detect obsta- cles that are extremely close to the vehicle.
Page 265 Touch “Toyota park assist” on the “Vehicle Settings” screen. STEP Alert volume setting Display on/off Alert distance setting ■ Alert volume setting The alert volume can be adjusted. Touch “1” to “5” on the “TOYOTA park assist settings”. STEP Touch “OK”. STEP...
Page 266 On or off can be selected for Toyota parking assist-sensor display. Touch “Display Off”. STEP When the “Display Off” indicator is turned on, the display of Toyota parking assist-sensor will be off. Touch “Display Off” again to turn the display of Toyota parking assist-sensor on.
Page 267 • The area directly under the bumpers is not detected. • If obstacles draw too close to the sensor. • A non-genuine Toyota suspension (lowered suspension etc.) is installed. • People may not be detected if they are wearing certain types of cloth- ing.
Page 268 2-4. Using other driving systems ● The shape of the obstacle may prevent the sensor from detecting it. Pay particular attention to the following obstacles: • Wires, fences, ropes, etc. • Cotton, snow and other materials that absorb sound waves •...
Page 269 When using Toyota parking assist-sensor In the following situations, the system may not function correctly due to a sensor malfunction etc. Have the vehicle checked by your Toyota dealer. ● A beep does not sound when you turn the main switch on.
Page 270: Four-Wheel Drive System
2-4. Using other driving systems Four-wheel drive system Use the four-wheel drive control switch and center differential lock/ unlock switch to select the following transfer and center differential modes. ■ Four-wheel drive control switch “H4” (high speed position) Normal driving on all types of roads.
Page 271 2-4. Using other driving systems Shifting between “H4” and “L4” ■ Shifting from “H4” to “L4” Stop the vehicle completely. STEP Shift the shift lever to “N”. STEP Push and turn the four-wheel drive control switch fully clock- STEP wise. Maintain this condition until the low speed four-wheel drive indicator light turns on.
Page 272 2-4. Using other driving systems ■ Advice for driving on slippery roads ● If you shift the four-wheel drive control switch to “L4” and the shift lever to the “2” range of “S” while driving in steep off-road areas, the output of the brake can be controlled effectively by the Active TRC, which assists the driver to control the driving power of 4 wheels.
Page 273 In this case, you may not be able to shift between “H4” and “L4”, and the center differential lock may not be operable. Have the vehicle inspected by your Toyota dealer immediately.
Page 274 2-4. Using other driving systems CAUTION ■ While driving Never move the four-wheel drive control switch if the wheels have lost trac- tion. Doing so may cause an accident resulting in death or serious injury. ■ When the vehicle is parked If the shift lever is moved before the low speed four-wheel drive indicator turns on/off, the transfer mode may not be shifted completely.
Page 275: Crawl Control (With Turn Assist Function)
2-4. Using other driving systems Crawl Control (with Turn Assist function) Allows travel on extremely rough off-road surfaces at a fixed low speed without pressing the accelerator or brake pedal. Minimizes loss of traction or vehicle slip when driving on slippery road sur- faces, allowing for stable driving.
Page 276 2-4. Using other driving systems ■ Speed modes The following table shows some typical terrains and the recommended speed modes. Mode Road condition Rock, mogul (downhill) and gravel (downhill) Lo-Med Mogul (uphill) Snow, mud, gravel (uphill), sand, Med-Hi dirt, mogul (uphill) and grass ■...
Page 277 2-4. Using other driving systems When the system is turned off Crawl Control Press the ON/OFF switch while Crawl Control is operating. If the switch is turned off, the slip indicator and the Turn Assist indicator will go off (if the Turn Assist function is in use), the Crawl Control indicator will flash until the system has turned off completely, and a message stating that Crawl Control has been turned off will be dis- played on the multi-information display (if equipped) for several...
Page 278 2-4. Using other driving systems ■ The Crawl Control and Turn Assist function can be operated when Crawl Control ● The engine is running. ● The shift lever is in any gear other than “P” or “N”. ● The four-wheel drive control switch is in “L4”. ●...
Page 279 2-4. Using other driving systems ■ Function limitations Crawl Control ● In the following situations, brake control can be used to drive downhill at a constant speed. However, engine control is not available when driving uphill at a constant speed. •...
Page 280 2-4. Using other driving systems ■ Sounds and vibrations caused by the Crawl Control system ● A sound may be heard from the engine compartment when the engine is started or just after the vehicle begins to move. This sound does not indi- cate that a malfunction has occurred in Crawl Control system.
Page 281: Multi-Terrain Select
2-4. Using other driving systems ∗ Multi-terrain Select Multi-terrain Select is a system that assists drivability in off-road sit- uations. Select a mode that most closely matches the type of terrain on which you are driving from among 5 modes. Brake control can be optimized in accordance with the selected mode.
Page 282 2-4. Using other driving systems ■ Selectable modes A mode which matches the road conditions can be selected from among the following 5 modes. MUD & SAND LOOSE ROCK MOGUL ROCK & DIRT ROCK Mode Road Conditions Suitable for muddy roads, sandy roads, MUD &...
Page 283 2-4. Using other driving systems ■ Multi-terrain Select control starting conditions When all of the following conditions are satisfied, the Multi-ter- rain Select indicator will come on, the mode select screen will be displayed on the multi-information display, and Multi-terrain Select control will begin.
Page 284 2-4. Using other driving systems Statement on the multi-information display Mode selection Display the Multi-terrain Select mode. The display switches in accor- dance with the pressing of the DISP switch (→P. 220) or the conditions of each system. Mode status Display the name of the selected mode.
Page 285 After a short time, the TRC OFF indicator or the message on the multi-infor- mation display will go off, and you will be able to use Multi-terrain Select. ■ When there is a malfunction in the system The slip indicator light will come on. Have the vehicle inspected by your Toyota dealer immediately.
Page 286 2-4. Using other driving systems CAUTION ■ When using the Multi-terrain Select Observe the following precautions to avoid an accident that could result in death or serious injuries: ● There is a chance that the selected mode may not be the most appropriate in terms of road conditions such as pitch, slipperiness, undulation, etc.
Page 287: Multi-Terrain Monitor
2-4. Using other driving systems ∗ Multi-terrain Monitor The Multi-terrain Monitor displays the vehicle surroundings when driving at low speeds, thus assisting off-road driving and helping the driver to check the vehicle surroundings. ● The screen display, or the image of the front screen, wide view front &...
Page 288 Side-rear simultaneous display monitor ● When the shift lever is in “R” If the shift lever is shifted to “R”, the rear monitor (Toyota parking assist monitor) will be displayed, and the screen will switch every time the VIEW switch is pressed.
Page 289 2-4. Using other driving systems ■ Automatic display mode In this mode, the screen is switched automatically in response to vehi- cle speed and shift lever operation, in addition to screen switching by operating the VIEW switch. Touch “AUTO” on the front or wide view front &...
Page 290 2-4. Using other driving systems Range covered by each camera Front monitor Side-front simultaneous dis- play monitor Side-rear simultaneous dis- play monitor Rear monitor : Range of wide view front & side monitor display (The monitor for side displays left side only.) The illustration shown here is an example.
Page 291 2-4. Using other driving systems Display ■ Front monitor The image from the front camera is displayed. Use this monitor to help check the area in front of the vehicle for safety. Guidelines are shown to help determine the course. ■...
Page 292 ■ Rear monitor (Toyota parking assist monitor) The image from the rear camera is displayed. For information regarding the Toyota parking assist monitor, refer to “Naviga-...
Page 293 2-4. Using other driving systems Using the monitor ■ Front monitor Vehicle icon Displays the image being shown by the front monitor. Trajectory line (outside) Indicates the outer path of the tire. Trajectory line (inside) Indicates the inner path of the tire.
Page 294 2-4. Using other driving systems trajectory lines move according to the steering wheel position. : While the Turn Assist function of Crawl Control is operating, the trajectory lines will be dis- played as dotted lines. At this time, there may be a differ- ence between the trajectory lines and the actual course of progression.
Page 295 2-4. Using other driving systems ■ Wide view front & side monitor display Projected course line switch- ing button The course line display mode will change as follows each time the switch is touched. When the shift lever is in “R”, dis- play mode can not be changed.
Page 296 2-4. Using other driving systems Vehicle width line (blue) Indicates the width of the vehicle including the outside rear view mirror. Rear wheel contact point Shows the position of the vehi- cle’s rear tire. Automatic display mode Switches the projected course mode ■...
Page 297 Rear wheel contact point Shows the position of the vehi- cle’s rear tire. Vehicle rear edge line Shows the position of the vehi- cle’s rear edge. ■ Rear monitor (Toyota park assist monitor) Refer to “Navigation System Owner’s Manual”.
Page 298 2-4. Using other driving systems Projected course line display mode (Wide view front & side monitor display) No course lines mode Vehicle width line displayed. Minimum projected turning circle display mode The minimum projected turning circle line is added to the no course lines mode.
Page 299 2-4. Using other driving systems ■ Switching projected course line display mode Touch Turning course line display mode Minimum projected turning circle display mode No course lines mode...
Page 300 2-4. Using other driving systems ■ Using the vehicle width line & course line Vehicle width line Use the vehicle width line to check the vehicle’s distance from objects such as curbstones etc. As shown in the illustration, be sure that the vehicle width line does not overlap the object.
Page 301 2-4. Using other driving systems Minimum projected turning circle & projected course line Use the minimum projected turn- ing circle & projected course line (when displayed) to check the vehicle’s path with relation to obstacles. If the minimum projected turning circle line (blue) is over the obstacle as shown in the illustra- tion, or the obstacle falls within...
Page 302 ■ Interruption screens An interruption screen is displayed when an obstacle is within the detection range of the Toyota parking assist-sensor. (→P. 258) ■ When the door mirrors are folded. The screen will be turned off temporarily while the door mirrors are folding,...
Page 303 2-4. Using other driving systems ■ Displayed area The area covered by the camera is limited. Objects which are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary depending on vehicle orientation or road conditions.
Page 304 2-4. Using other driving systems Side camera (Wide view front & side monitor display) Camera’s field of view Objects visible to the camera Left side of vehicle...
Page 305 2-4. Using other driving systems Side camera (side-front simultaneous display monitor) Camera’s field of view Objects visible to the camera Right side of vehicle Left side of vehicle...
Page 306 2-4. Using other driving systems Side camera (side-rear simultaneous display monitor) Camera’s field of view Objects visible to the camera Right side of vehicle Left side of vehicle Rear camera Refer to the “Navigation System Owner’s Manual”...
Page 307 2-4. Using other driving systems ■ Multi-terrain Monitor cameras Side cameras Front camera Rear camera In the following cases, it may be difficult to see images on the screen even when the system is functioning correctly: ● The vehicle is in a dark area, such as at night. ●...
Page 308 2-4. Using other driving systems ■ Smear effect If a bright light, such as sunlight reflected off the vehicle body, is picked up by the camera, a smear effect characteristic to the camera may occur. : Smear effect  A phenomenon that occurs when a bright light is picked up by the camera;...
Page 309 On the system initialization screen, touch the “?” button to display the operating procedure. If this does not resolve the symptom, have the vehicle inspected by your Toyota dealer.
Page 310 If the front or the rear of the vehicle or the outside rear view mirror has been hit, the camera’s position and mounting angle may have changed. Have the vehicle inspected by your Toyota dealer. ● As the camera has a water proof construction, do not detach, disassemble or modify it.
Page 311 Conditions which may affect the Multi-terrain Monitor system ● If the tires are changed, the position of the guide lines displayed on the screen may be incorrect. When changing the tires, consult your Toyota dealer. ● Depending on the circumstances of the vehicle (number of passengers, amount of luggage, etc.), the position of the guide lines displayed on the...
Page 312: Driving Assist Systems
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■...
Page 313 2-4. Using other driving systems ■ PCS (Pre-Crash Safety) (if equipped) →P. 319 ■ Trailer Sway Control Helps the driver to control trailer sway by selectively applying brake pressure for individual wheels and reducing engine torque when trailer sway is detected. Trailer Sway Control is part of the VSC system and will not operate if VSC turned off or experiences a malfunction.
Page 314 2-4. Using other driving systems To disable Active TRC and/or VSC and Trailer Sway Control If the vehicle gets stuck in fresh snow or mud, Active TRC, VSC and Trailer Sway Control may reduce power from the engine to the wheels.
Page 315 2-4. Using other driving systems ■ Turning off Active TRC, VSC and Trailer Sway Control To turn the TRC, VSC and Trailer Sway Control off, press and hold the button for more than 3 sec- onds while vehicle stopped. The VSC OFF indicator light will come on and the “TRC OFF”...
Page 316 2-4. Using other driving systems ■ Automatic Active TRC, VSC and Trailer Sway Control reactivation If the Active TRC, VSC and Trailer Sway Control are turned off, the systems will not turn on even when vehicle speed increases. ■ If the brake system overheats The brake system may overheat.
Page 317 2-4. Using other driving systems CAUTION Any of the following conditions may result in an accident which could cause death or serious injury: ■ The Multi Terrain ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded. ●...
Page 318 The Multi Terrain ABS, Active TRC, VSC and Trailer Sway Control will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. ■...
Page 319 In the following situations, there is the possibility that a system malfunction has occurred, and drive comfort and the vehicle’s ability to travel on poor road surfaces may be reduced. Take the vehicle to your Toyota dealer imme- diately. ●...
Page 320: Pcs (Pre-Crash Safety)
2-4. Using other driving systems ∗ PCS (Pre-Crash Safety) When the radar sensor detects possibility of a frontal collision, the pre-crash safety system such as the brakes and seat belts help to be automatically engaged to lessen impact as well as vehicle damage. ■...
Page 321 2-4. Using other driving systems ■ Obstacles not detected The sensor cannot detect plastic obstacles such as pylons. There may also be occasions when the radar sensor cannot detect pedestrians, animals, bicycles, motorcycles, trees, or snowdrifts. ■ The pre-crash safety system is operational when ●...
Page 322 2-4. Using other driving systems ■ Conditions that may trigger the system even if there is no possibility of collision ● When there is an object by the roadside at the entrance to a curve ● When passing an oncoming vehicle on a curve ●...
Page 323 2-4. Using other driving systems ■ When there is a malfunction in the system Warning lights and/or warning messages will turn on or flash. (→P. 509, 518) ■ Situations in which the pre-crash safety system does not function properly The system may not function effectively in situations such as the following: ●...
Page 324 If the sensor moves even slightly off position, the system may become inaccurate or malfunction. If the sensor or surrounding area are subject to a strong impact, always have the area inspected and adjusted by your Toyota dealer. ● Do not disassemble the sensor.
Page 325: Driving Information Off-Road Precautions
2-5. Driving information Off-road precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications.
Page 326 2-5. Driving information CAUTION ■ Off-road vehicle precautions Always observe the following precautions to help minimize the risk of serious personal injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt.
Page 327 2-5. Driving information CAUTION ■ Off-road driving precautions Always observe the following precautions to help minimize the risk of serious personal injury or damage to your vehicle: ● Drive carefully when off the road. Do not take unnecessary risks by driving in dangerous places.
Page 328 2-5. Driving information NOTICE ■ To prevent the water damage Take all necessary safety measures to ensure that water damage to the engine or other components does not occur. ● Water entering the engine air intake will cause severe engine damage. ●...
Page 329: Cargo And Luggage
2-5. Driving information Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far for- ward as possible helps maintain vehicle balance.
Page 330 2-5. Driving information CAUTION ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury. ● Stow cargo and luggage in the luggage compartment whenever possible. ● Do not stack anything in the luggage compartment higher than the seat- backs.
Page 331: Winter Driving Tips
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 332 2-5. Driving information ■ Before driving the vehicle Perform the following according to the driving conditions. ● Do not try to forcibly open a window or move a wiper that is frozen. Pour warm water over the frozen area to melt the ice. Wipe away the water immediately to prevent it from freezing.
Page 333 2-5. Driving information Selecting tire chains Use the correct tire chain size when mounting the tire chains. Chain size is regulated for each tire size. Side chain (5 mm [0.20 in.] in diameter) Cross chain (6.3 mm [0.25 in.] in diameter) ITY25C045 Regulations on the use of tire chains ●...
Page 334 2-5. Driving information CAUTION ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failing to do so may result in a loss of vehicle control and cause death or serious injury. ● Use tires of the size specified for your vehicle. ●...
Page 335: Trailer Towing
For your safety and the safety of others, do not overload the vehicle or trailer. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. For towing purposes, we recommend use of the following parts: ●...
Page 336 2-5. Driving information ■ Gross axle weight The load on either the front or rear axle resulting from distribu- tion on the gross vehicle weight on both axles must not exceed the following. Front: 1630 kg (3594 lb.) Rear: 1950 kg (4299 lb.) ■...
Page 337 Towing a trailer Contact your Toyota dealer for further information about additional requirements such as a towing kits, etc. Hitch Trailer hitch assemblies have different weight capacities established by the hitch manufacturer. Even though the vehicle may be rated for towing a higher weight, the operator must never exceed the maxi- mum weight rating specified for the trailer hitch.
Page 338 ■ Break-in schedule Toyota recommends that you do not use a new vehicle or a vehicle with any new power train components (engine, transmission, differential, wheel bear- ings, etc.) to tow a trailer for the first 800 km (500 miles) of driving.
Page 339 2-5. Driving information ■ If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. ● If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel.
Page 340 2-5. Driving information CAUTION ■ To avoid accident or injury ● The total trailer weight (trailer weight plus the weight of cargo) must not exceed 3500 kg (7716 lb.). ● Do not exceed the trailer hitch assembly weight, gross vehicle weight, gross axle weight and trailer tongue load capacities.
Page 341 ■ When installing a trailer hitch ● Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ● Do not use axle-mounted hitches, as they can cause damage to the axle housing, wheel bearings, wheels or tires.
Page 342 2-5. Driving information ● As stopping distance is increased when towing a trailer, vehicle-to- vehicle distance should be increased. For each 10 km/h (6 mph) of speed, allow at least one vehicle and trailer length. ● Avoid sudden braking as you may skid, resulting in jackknifing and loss of control.
Page 343 2-5. Driving information ● Due to the added load of the trailer, your vehicle’s engine may overheat on hot days (at temperatures over 30°C [85°F]) when driving up a long or steep grade. If the engine coolant temperature gauge indicates overheating, immediately turn off the air condition- ing (if in use), pull your vehicle off the road and stop in a safe spot.
Page 344 2-5. Driving information CAUTION ■ To avoid an accident ● Observe the legal maximum speeds for trailer towing. ● Slow down and downshift before descending steep or long downhill grades. Do not make sudden downshifts while descending steep or long downhill grades.
Page 345 2-5. Driving information...
Page 346 Interior features 3-1. Using the air conditioning 3-3. Using the storage features system and defogger List of storage features ..379 • Glove box ....... 380 Front manual air • Console box....381 conditioning system ..346 • Overhead console ..382 Front automatic air •...
Page 347 3-1. Using the air conditioning system and defogger ∗ Front manual air conditioning system Fan speed display Temperature setting display Fan speed Airflow display Temperature control Recirculated air mode Outside mode Changes the air outlets used Windshield defogger Air conditioning on/off ∗...
Page 348 3-1. Using the air conditioning system and defogger Adjusting the setting ■ Adjusting the temperature setting Press “>” to increase the temperature and “<” to decrease the tem- perature on ■ Adjusting the fan speed Press “>” (increase) or “<” (decrease) on The fan speed is shown on the display.
Page 349 3-1. Using the air conditioning system and defogger Air flows to the upper body. Air flows to the upper body and feet. Air flows to the feet. Air flows to the feet and the windshield defogger operates.
Page 350 3-1. Using the air conditioning system and defogger ■ Switching between outside air and recirculated air modes Press to switch to recirculated air mode and press to switch to outside air mode. Defogging the windshield Press The air conditioning system con- trol operates automatically.
Page 351 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Front center outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. Front side outlets Direct air flow to the left or right, up or down.
Page 352 3-1. Using the air conditioning system and defogger ■ Using the system in recirculated air mode The windows will fog up more easily if the recirculated air mode is used for an extended period. ■ When driving on dusty roads Close all windows.
Page 353 3-1. Using the air conditioning system and defogger NOTICE ■ To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is stopped.
Page 354: Conditioning System
3-1. Using the air conditioning system and defogger ∗ Front automatic air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner’s Manual”. Without navigation system and rear air conditioning system Passenger’s side temperature control Driver’s side temperature control...
Page 355 3-1. Using the air conditioning system and defogger Others Passenger’s side temperature control Driver’s side temperature control Fan speed Fan speed display Airflow display Airflow display Driver’s side Passenger’s side temperature temperature setting display setting display Outside air mode Changes the air outlets used Changes the air outlets used Recirculated Automatic...
Page 356 3-1. Using the air conditioning system and defogger Using the automatic mode Press STEP The air conditioning system will begin to operate. Air outlets and fan speed are automatically adjusted according to the temperature set- ting. Press “∧” to increase the temperature and “∨” to decrease the STEP temperature on The temperature for the driver’s and front passenger’s seats can be...
Page 357 3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting (with rear air conditioning system) Press “∧” to increase the temperature and “∨” to decrease the tem- perature on The air conditioning system switches between individual and simulta- neous modes each time is pressed.
Page 358 3-1. Using the air conditioning system and defogger ■ Adjusting the temperature setting (without rear air condition- ing system) Press “∧” to increase the temperature and “∨” to decrease the tem- perature on The air conditioning system switches between dual and simultaneous modes each time is pressed.
Page 359 3-1. Using the air conditioning system and defogger ■ Changing the air outlets With rear air conditioning system Press For front passenger’s seat For driver’s seat The air outlets switch each time the button is pressed. Different air outlets for the driver’s and front passenger’s seats can be chosen.
Page 360 3-1. Using the air conditioning system and defogger Air flows to the upper body and feet. : Depending on the rear air con- ditioning setting. Air flows to the feet. : Depending on the rear air con- ditioning setting. Air flows to the feet and the windshield defogger operates.
Page 361 3-1. Using the air conditioning system and defogger Changing the rear seat settings from the front seat (with rear air conditioning system) ■ Adjusting the temperature setting Press STEP Press “∧” to increase the temperature and “∨” to decrease the STEP temperature on (for left-hand rear seat) and...
Page 362 3-1. Using the air conditioning system and defogger Defogging the windshield Press The air conditioning system con- trol operates automatically. Recirculated air mode will auto- matically switch to outside air REAR FRONT REAR mode. ITY31C024 Pollen removal mode Press Outside air mode switches to recirculated air mode. Pollen is removed from the air and the air flows to the upper part of the body.
Page 363 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Front center outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. ITY31C032 Front side outlets Direct air flow to the left or...
Page 364 3-1. Using the air conditioning system and defogger ■ Using the automatic mode Fan speed is adjusted automatically in accordance with the temperature set- ting and ambient conditions. As a result, the following may occur. ● Immediately after is pressed, the fan may stop for a while until warm or cool air is ready to flow.
Page 365 • The start timing of the blower may be delayed for a short period of time immediately after the air conditioning system is started in automatic mode. ■ Air conditioning filter →P. 452 ■ Customization that can be configured at Toyota dealer Settings can be changed. (Customizable features →P. 593)
Page 366 3-1. Using the air conditioning system and defogger CAUTION ■ To prevent the windshield from fogging up Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
Page 367 3-1. Using the air conditioning system and defogger ∗ Rear air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Fan speed display Airflow display Left side temperature setting display Right side temperature setting display Left side temperature control Right side temperature control Changes the air outlets used...
Page 368 3-1. Using the air conditioning system and defogger Adjusting the setting ■ Adjusting the temperature setting Press “∧” to increase the temperature and “∨” to decrease the tem- perature on The temperature for the right-hand and left-hand rear seats can be set separately.
Page 369 3-1. Using the air conditioning system and defogger ■ Changing the air outlets Press The air outlets switch each time the button is pressed. Air flows to the upper body. ITY31C020 Air flows to the upper body and feet. Air flows to the feet.
Page 370 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Direct air flow to the left or right, up or down. Turn the knob fully to the back of the vehicle to close the vent.
Page 371 3-1. Using the air conditioning system and defogger ∗ Rear cooler system REAR COOLER REAR ITY31C037 Fan speed control knob Rear cooler on/off switch Adjusting the fan speed Press to turn on the system. STEP REAR COOLER to adjust the desired fan speed. STEP REAR COOLER Press...
Page 372 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Direct air flow to the left or right, up or down. Turn the knob fully to the back of the vehicle to close the vent.
Page 373 3-1. Using the air conditioning system and defogger ∗ Heater idle up switch This feature is used to boost heating effect in extremely cold condi- tions when the vehicle is not moving. Press the switch to increase engine speed. Press the switch again to IDLE return the engine to the normal idle speed.
Page 374 3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Clear the rear window using the defogger. (For vehicles with outside rear view mirror defoggers, turning the rear window defogger on will turn the outside rear view mirror defoggers on. The outside rear view mirror is used to remove raindrops, dew and frost from the outside rear view mirrors.) With navigation system...
Page 375 3-1. Using the air conditioning system and defogger Without navigation system (with automatic air conditioning sys- tem) ■ The rear window and outside rear view mirror defoggers can be oper- ated when Vehicles without a smart entry & start system The engine switch is in the “ON”...
Page 376: Interior Lights List
3-2. Using the interior lights Interior lights list Front personal lights (if equipped) (→P. 377) Front interior light (if equipped) (→P. 376) Rear interior lights (→P. 376) Rear personal lights (if equipped) Door courtesy lights (if equipped) “ENGINE START STOP” switch light (if equipped) Scuff lighting (if equipped)
Page 377 3-2. Using the interior lights Interior lights Interior lights Front (if equipped) Door position on/off On/off SPOT DOOR ON OFF SPOT Rear Door position...
Page 378 3-2. Using the interior lights Personal lights Personal lights (if equipped) Front On/off SPOT DOOR ON OFF SPOT Rear (type A) On/off Rear (type B) On/off ITY33C014...
Page 379 If the interior lights remain on when the “ENGINE START STOP” switch is turned off, the lights will go off automatically after 20 minutes. ■ Customization that can be configured at Toyota dealer Settings (e.g. Time period before the interior lights turn off) can be changed. (Customizable features →P. 593)
Page 380 3-3. Using the storage features List of storage features Bottle holders Card holder Door pockets Cup holders Glove box Console box Cool box Overhead console (if equipped) Auxiliary boxes CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●...
Page 381: Glove Box
3-3. Using the storage features Glove box Glove box Open (push button) Lock with the master key or the mechanical key Unlock with the master key or the mechanical key ■ Glove box light (if equipped) The glove box light turns on when the tail lights are on. ■...
Page 382 3-3. Using the storage features Console box Console box Your vehicle is equipped with either a lower console box or cool box. For vehicles with the cool box, refer to page 388. Upper console box Press the tab to open. ITY34C007 Lower console box (if equipped) Lift the lever to open.
Page 383 3-3. Using the storage features Console box and overhead console CAUTION ■ While driving Keep the console box closed. Injuries may result in the event of sudden braking, sudden swerving or an accident. Overhead console (if equipped) Press the button. The overhead console is useful temporarily storing...
Page 384 3-3. Using the storage features Cup holders Cup holders Front (type A) Press down and release the lid. You can adjust or remove the separator inside. ITY34C012 Front (if equipped with type B) Open the lower console box lid. ITY34C014 Second seats (if equipped) Pull the armrest down.
Page 385 3-3. Using the storage features Cup holders Third seats (if equipped) ■ Removing the holder (front cup holders type A) Pull up the holder. CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 386 3-3. Using the storage features Cup holders and bottle holders NOTICE ■ To prevent damage to the cup holders (vehicles with a rear cup holder) Stow the cup holders before stowing the rear armrest. Bottle holders Front seats ITY34C017 Second seats ITY34C024...
Page 387 3-3. Using the storage features Bottle holders and card holder Third seats NOTICE ■ Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid.
Page 388 3-3. Using the storage features Auxiliary boxes Auxiliary boxes Type A ITY34C023 Type B (if equipped)
Page 389 3-4. Other interior features ∗ Cool box While the engine is running, the cool box, which is cooled by the air conditioning, can be used. Lift the lever to open. STEP ITY34C029 On/off STEP When on, the indicator light COOL comes on.
Page 390 3-4. Other interior features CAUTION ■ While driving Keep the cool box closed. Injuries may result in the event of sudden braking, sudden swerving or an accident. NOTICE ■ To prevent battery discharge Do not leave the cool box on longer than necessary when the engine is stopped.
Page 391 3-4. Other interior features Sun visors Main sun visor Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender (if equipped): Place in side position, then slide backwards. Sub-sun visor (if equipped) Flip down with the main sun visor in position...
Page 392 3-4. Other interior features ∗ Vanity mirror Slide the cover. The light turns on when the cover is opened. NOTICE ■ To prevent battery discharge Do not leave the vanity lights on for extended periods while the engine is off. ∗...
Page 393 3-4. Other interior features Clock With navigation system Refer to “Navigation System Owner’s Manual”. Without navigation system The clock can be adjusted by pressing the buttons. Adjust hours. Adjust minutes. Round the nearest hour. :e.g. 1:00 to 1:29→1:00 1:30 to 1:59→2:00 ■...
Page 394 3-4. Other interior features Outside temperature display The displayed temperature ranges from -30°C (-22°F) up to 50°C (122°F). Center panel (vehicles with navigation system) Center panel (vehicles without navigation system)
Page 395 The “ENGINE START STOP” switch is in IGNITION ON mode. ■ When --- is displayed The system may be malfunctioning. Take your vehicle to your Toyota dealer. ■ Display In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change.
Page 396: Ashtrays
3-4. Other interior features Ashtrays Front Press in and release the lid to open. Press down on the lock spring plate to remove. Press the lid to close. Rear Pull the ashtray lid to open. Pull the ashtray upwards to remove.
Page 397 3-4. Other interior features Cigarette lighter Push the cigarette lighter in. The cigarette lighter will pop up when ready for use. ■ The cigarette lighter can be used when Vehicles without a smart entry & start system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart entry &...
Page 398 3-4. Other interior features ∗ Power outlet The power outlets can be used for a following component. 12 V: Accessories that run on less than 10 A 220 V AC: Accessories that use less than 100 W Front (12V) Rear (12V) ∗...
Page 399 3-4. Other interior features Luggage compartment (220V AC) ■ The power outlet can be used when 12V: The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode. 220V: The “ENGINE START STOP” switch is in IGNITION ON mode. ■...
Page 400 3-4. Other interior features NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit. ■ To prevent the fuse from being blown 12V: Do not use an accessory that uses more than 12 V/10 A.
Page 401 Press the switch to turn the heated steering wheel off and then press the switch again. If the indicator light still flashes, a malfunction may be occur- ring. Turn the heated steering wheel off and have the vehicle inspected by your Toyota dealer. ∗ : If equipped...
Page 402 3-4. Other interior features CAUTION ■ Burns ● Only appropriately qualified and capable non-impaired persons should operate the vehicle. However, care should be taken to prevent injury if anyone in the following categories comes into contact with the steering wheel when the heated steering wheel is on: •...
Page 403: Ventilators
3-4. Other interior features ∗ Seat heaters and ventilators The seat heaters and ventilators heat the seats and maintain good airflow by blowing air from the seats. ■ Front seat heaters/ventilators (if equipped) Press the knob to release it. Press the knob back in when finished adjusting the tempera- ture or the seat air flow.
Page 404 3-4. Other interior features ■ Front seat ventilators (if equipped) Press the knob to release it. Press the knob back in when finished adjusting the seat air flow. The indicator light comes on. Adjusts the seat airflow The further you turn the knob clockwise, the stronger the air- flow becomes.
Page 405 3-4. Other interior features ■ Front seat heaters (if equipped) Press the knob to release it. Press the knob back in when finished adjusting the tempera- ture. The indicator light comes on. Adjusts the seat tempera- ture The further you turn the knob clockwise, the warmer the seat becomes.
Page 406 The seat heaters and ventilators can be used when The “ENGINE START STOP” switch is in IGNITION ON mode. ■ Replacing the air filters Filters are installed in the seat ventilators. For replacement of the filters, con- tact your Toyota dealer. CAUTION ■ Burns ●...
Page 407: Armrest
3-4. Other interior features ∗ Armrest Fold down the armrest while pulling the strap. ITY35C019 NOTICE ■ To prevent damage to the armrest Do not place too much strain on the armrest. ∗ : If equipped...
Page 408: Assist Grips
3-4. Other interior features Assist grips An assist grip (Type A) installed on the ceiling can be used to sup- port your body while sitting on the seat. An assist grip (Type B) installed on the pillar can be used when get- ting in or out of the vehicle and others.
Page 409: Floor Mats
3-4. Other interior features Floor mats Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks STEP (clips) into the floor mat eye- lets.
Page 410 When installing the driver’s floor mat ● Do not use floor mats designed for other models or different model year vehicles, even if they are Toyota Genuine floor mats. ● Only use floor mats designed for the driver’s seat. ●...
Page 411: Luggage Compartment Features
3-4. Other interior features Luggage compartment features ■ Cargo hooks Cargo hooks are provided for securing loose items. ■ Storage compartment (if equipped) Remove the cover. ■ Warning reflector holder (if equipped) Remove the cover. Hold the warning reflector with bands.
Page 412 3-4. Other interior features ■ First-aid kit holder (if equipped) Remove the cover. Hold the first-aid kit with a band. The first-aid kit itself is not included as an original equip- ment. CAUTION ■ When the cargo hooks are not in use To avoid injury, always return the cargo hooks to their positions when they are not in use.
Page 413 3-4. Other interior features...
Page 414 Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior ..414 Cleaning and protecting the vehicle interior ..417 4-2. Maintenance Maintenance requirements....420 4-3. Do-it-yourself maintenance Do-it-yourself service precautions ..... 423 Hood ......... 426 Engine compartment..427 Tires........
Page 415 4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 416 4-1. Maintenance and care ■ Aluminum wheels (if equipped) ● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. ●...
Page 417 4-1. Maintenance and care CAUTION ■ Caution about the exhaust pipe Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns. NOTICE ■...
Page 418 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 419 4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 420 4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ●...
Page 421: Requirements
These are best performed by qualified technicians. Even if you’re an experienced do-it-yourself mechanic, we recommend that repairs and maintenance be conducted by your Toyota dealer who will keep a record of maintenance on your Toyota. This record could be helpful should you ever require Warranty Service.
Page 422 4-2. Maintenance ■ Where to go for service? It makes good sense to take your vehicle to your local Toyota dealer for ser- vice. Toyota technicians are well-trained specialists. And they are receiving the latest service information through technical bulletins, service tips, and in dealership training programs.
Page 423 4-2. Maintenance CAUTION ■ If your vehicle is not properly maintained It could result in serious damage to the vehicle and possible serious injury or death. ■ Warning in handling of the battery Battery posts, terminals and related accessories contain lead and lead com- pounds which are known to cause brain damage.
Page 424 • Baking soda Battery condition (→P. 437) • Grease • Conventional wrench (for terminal clamp bolts) • Toyota Super Long Life Coolant or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid Engine coolant level (→P.
Page 425 4-3. Do-it-yourself maintenance Items Parts and tools • Tire pressure gauge Tire inflation pressure (→P. 448) • Compressed air source • Water or washer fluid containing antifreeze (for winter use) Washer fluid (→P. 441) • Funnel (used only for adding water or washer fluid) CAUTION The engine compartment contains many mechanisms and fluids that may...
Page 426 4-3. Do-it-yourself maintenance CAUTION ■ When working near the electric cooling fan or radiator grille Vehicles without a smart entry & start system Be sure the engine switch is off. With the engine switch in the “ON” position, the electric cooling fans may automatically start to run if the air conditioning is on and/or the coolant tem- perature is high.
Page 427 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood release lever. STEP The hood will pop up slightly. Lift the hood catch and lift the STEP hood. CAUTION ■ Pre-driving check Check that the hood is fully closed and locked.
Page 428 4-3. Do-it-yourself maintenance Engine compartment 1UR-FE engine Air cleaner (→P. 443) Engine oil filler cap (→P. 432) Engine oil level dipstick (→P. 430) Fuse box (→P. 459) Engine coolant reservoir Washer fluid tank (→P. 441) (→P. 435) Battery (→P. 437) Cooling fans Condenser (→P.
Page 429 4-3. Do-it-yourself maintenance 1VD-FTV engine Air cleaner (→P. 443) Cooling fans Engine coolant reservoir Fuel filter (→P. 442, 567) (→P. 435) Fuse box (→P. 459) Engine oil level dipstick Washer fluid tank (→P. 441) (→P. 430) Battery (→P. 437) Engine oil filler cap Condenser (→P.
Page 430 4-3. Do-it-yourself maintenance Engine compartment cover ■ Removing the engine compartment cover ■ Installing the clips Push up center portion Insert Press NOTICE ■ After installing an engine compartment cover Make sure that the cover is securely installed in its original position.
Page 431 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After warming up the engine STEP and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
Page 432 4-3. Do-it-yourself maintenance Holding a rag under the end, pull the dipstick out and check STEP the oil level. Gasoline engine Normal Excessive The shape of the dipstick may dif- fer depending on the type of vehi- cle or engine. Diesel engine Normal Excessive...
Page 433 4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. (→P. 579) Make sure to check the oil type and prepare the items needed before adding oil.
Page 434 4-3. Do-it-yourself maintenance ■ Engine oil consumption A certain amount of engine oil will be consumed while driving. In the follow- ing situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals. ●...
Page 435 Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal.
Page 436 4-3. Do-it-yourself maintenance Engine coolant Gasoline engine The coolant level is satisfactory if it is between the “F” and “L” lines on the reservoir when the engine is cold. Reservoir cap “F” “L” If the level is on or below the “L” line, add coolant up to the “F”...
Page 437 If the coolant level drops within a short time after replenishing Visually check the radiator, hoses, reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer test the cap and check for leaks in the cooling system. ■...
Page 438 Check the radiator, condenser and intercooler and clear any foreign objects. If any of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION ■ When the engine is hot Do not touch the radiator, condenser or intercooler, as they may be hot and may cause serious injuries, such as burns.
Page 439 4-3. Do-it-yourself maintenance ■ Adding distilled water O.K. Remove the vent plug. STEP Add distilled water. STEP If the upper line cannot be seen, check the fluid level by looking directly at the cell. Put the vent plug back on and close securely. STEP ■...
Page 440 4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near bat- tery: ●...
Page 441 4-3. Do-it-yourself maintenance CAUTION ■ Emergency measures regarding electrolyte ● If electrolyte gets in your eyes Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention. If possible, continue to apply water with a sponge or cloth while traveling to the nearest medical facility.
Page 442 4-3. Do-it-yourself maintenance Washer fluid If any washer does not work or the warning message appears on the multi-information display (vehicles with Optitron type meters) or the warning indicator light comes on (vehicles with non-Optitron type meters), the washer tank may be empty. Add washer fluid.
Page 443 Fuel filter (diesel engine only) You may drain the fuel filter yourself. However, as the operation is dif- ficult, we recommend having it drained by your Toyota dealer. Even if you decide to drain it yourself, contact your Toyota dealer.
Page 444 4-3. Do-it-yourself maintenance Air cleaner filter Use compressed air to remove dust or sand etc. from the area STEP surrounding the air cleaner filter case. Remove the clips. STEP Lift the cover and take out the fil- STEP ter. Inspect the outer surface of the filter, and replace the filter if it is extremely dirty.
Page 445 4-3. Do-it-yourself maintenance CAUTION ■ To prevent inhaling dust Wear a respirator when using compressed air to clean the air cleaner filter. NOTICE ■ To prevent damaging the engine ● Do not drive with the air cleaner filter removed. Doing so may cause excessive engine wear.
Page 446 Check spare tire condition and inflation pressure if not rotated. ■ Tire rotation Rotate the tires in the order shown. To equalize tire wear and help extend tire life, Toyota recom- mends that you rotate your Front tires approximately every 5000 km (3000 miles).
Page 447 ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer. ■ Tire life Any tire over 6 years old must be checked by a qualified technician even if they have seldom or never been used or damage is not obvious.
Page 448 Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply tires).
Page 449 Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●...
Page 450 4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. ● Excessive wear ● Uneven wear ●...
Page 451: Wheels
● Bent wheels that have been straightened ■ Aluminum wheel precautions ● Use only Toyota wheel nuts and wrenches designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
Page 452 4-3. Do-it-yourself maintenance CAUTION ■ When replacing wheels ● Do not use wheels that are a different size from those recommended in the Owner’s Manual, as this may result in loss of handling control. ● Never use an inner tube in a leaking wheel which is designed for a tube- less tire.
Page 453 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be cleaned or changed regularly to maintain air conditioning efficiency. ■ Removal method Vehicles without a smart entry & start system: STEP Turn the engine switch to the “ON” position and switch to recirculated air mode, then turn the engine switch to the “LOCK”...
Page 454 2 minutes at 500 kPa (5.0 kgf/cm or bar, 72 psi). If it is not available, have the filter cleaned by your Toyota dealer. ■ Replacement method Remove the air conditioning filter and replace it with a new one.
Page 455 4-3. Do-it-yourself maintenance ■ Checking interval Inspect, clean and replace the air conditioning filter according to the mainte- nance schedule. In dusty areas or areas with heavy traffic flow, more fre- quent cleaning or early replacement may be required. (For scheduled maintenance information, please refer to the “Warranty and Service Book- let”.) ■...
Page 456 4-3. Do-it-yourself maintenance Electronic key battery Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with rag.) ●...
Page 457 4-3. Do-it-yourself maintenance Open the case cover using a STEP coin protected with tape etc. and remove the depleted bat- tery. Insert a new battery with the “+” terminal facing up. Vehicles with a smart entry & start system Take out the mechanical key. STEP Remove the cover.
Page 458 Vehicles without a smart entry & start system: CR2016 Vehicles with a smart entry & start system: CR1632 ● Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by your Toyota dealer.
Page 459 4-3. Do-it-yourself maintenance CAUTION ■ Removed battery and other parts These parts are small and if swallowed by a child, they can cause choking. Keep away from children. Failure to do so could result in death or serious injury. NOTICE ■...
Page 460: Fuses
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Vehicles without a smart entry & start system: Turn the STEP engine switch to the “LOCK”...
Page 461 4-3. Do-it-yourself maintenance Remove the lid. ITY42C010 Driver’s side instrument panel (if equipped) Remove the lid. ITY42C028 After a system failure, see “Fuse layout and amperage rat- STEP ings” (→P. 463) for details about which fuse to check. Remove the fuse with the pull- STEP out tool.
Page 462 4-3. Do-it-yourself maintenance Check if the fuse has blown. STEP Type A and B Normal fuse Type A Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. ITY42C012 Type B ITY42C013...
Page 463 4-3. Do-it-yourself maintenance Type C and D Normal fuse Type C Blown fuse Contact your Toyota dealer. ITY42C014 Type D ITY42C015...
Page 464 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Fuse Ampere Circuit 15 A A/F heater EFI MAIN2 15 A VNT DRIVER, EFI, EDU HORN 10 A Horn EFI MAIN 25 A EFI, A/F heater, fuel pump IG2 MAIN 30 A INJ, IGN, MET RR A/C...
Page 465 4-3. Do-it-yourself maintenance Fuse Ampere Circuit ALT-CDS 10 A ALT-CDS FR FOG 7.5 A Front fog lights SECURITY SECURITY SEAT-A/C RH 25 A Seat heaters and ventilators Stoplights, high mounted stoplight, STOP 15 A ABS, VSC, main body ECU, EFI, trailer AI PMP HTR 10 A...
Page 466 4-3. Do-it-yourself maintenance Fuse Ampere Circuit A/PUMP NO.2 50 A No circuit GLOW2 80 A Engine glow system Headlight, HEAD LL, HEAD RL, MAIN 40 A HEAD LH, HEAD RH ABS1 50 A ABS2 30 A 30 A Starter system ID code box, smart entry &...
Page 467 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Navigation system, audio system, RAD NO.1 10 A parking assist system Smart entry & start system, over- head module, tilt and telescopic ECU-B1 steering, meter, cool box, gateway ECU, steering sensor DOME1 10 A Illuminated entry system, clock HEAD LH 15 A...
Page 468 4-3. Do-it-yourself maintenance ■ Passenger’s side instrument panel Fuse Ampere Circuit 15 A Cigarette lighter BK/UP LP 10 A Back-up lights, trailer Audio system, parking assist sys- tem, multi-display assembly, main 7.5 A body ECU mirror ECU, smart entry & start system, clock Four-wheel drive system, ashtray, cigarette lighter, cool box, cruise control, center differential lock,...
Page 469 4-3. Do-it-yourself maintenance Fuse Ampere Circuit WINCH No circuit Cool box, condenser fan, cooler compressor, rear window and out- A/C IG 10 A side rear view mirror defoggers, air conditioning system Tail lights, license plate lights, front TAIL 15 A fog lights, trailer, parking lights WIPER 30 A...
Page 470 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Ignition switch TI & TE 15 A Tilt and telescopic steering FR P/SEAT RH 30 A Power seat PWR OUTLET 15 A Power outlet 7.5 A On-Board diagnosis 30 A Pre-crash safety DOOR NO.1 25 A Main body ECU FR P/SEAT LH...
Page 471 4-3. Do-it-yourself maintenance ■ Driver’s side instrument panel (if equipped) Fuse Ampere Circuit RSF LH 30 A No circuit B/DR CLSR RH 30 A Back door closer B/DR CLSR LH 30 A Back door closer RSF RH 30 A No circuit DOOR DL 15 A No circuit...
Page 472 Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. ●...
Page 473 You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 474 4-3. Do-it-yourself maintenance ■ Front bulb locations Vehicles with halogen headlight Headlight low beam Front position light Headlight high beam Side turn signal light (front fender type) Front turn signal light Fog light (if equipped) Vehicles with discharge headlight Front turn signal light Headlight high beam Fog light (if equipped)
Page 475 4-3. Do-it-yourself maintenance ■ Rear bulb locations Lift-up back door Rear turn signal light Back-up light License plate lights Double back door Rear turn signal light Stop/tail light Back-up light License plate lights...
Page 476 4-3. Do-it-yourself maintenance Replacing light bulbs ■ Headlight low beams (halogen bulb) For the left side only: Remove STEP the securing bolt and move the washer fluid filler opening. ITY43C012 Turn the bulb base counterclock- STEP wise. ITY43C038 Unplug connector while STEP depressing the lock release.
Page 477 4-3. Do-it-yourself maintenance Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. STEP Shake the bulb base gently to check that it is not loose, turn the headlights on once and visually confirm that no light is leaking through the mounting.
Page 478 4-3. Do-it-yourself maintenance ■ Headlight high beams Vehicles with halogen headlight Turn the bulb base counterclock- STEP wise. ITY43C040 Unplug connector while STEP depressing the lock release. ITY43C041...
Page 479 4-3. Do-it-yourself maintenance Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert. Turn and secure the bulb base. STEP Shake the bulb base gently to check that it is not loose, turn the headlights on once and visually confirm that no light is leaking through the mounting.
Page 480 4-3. Do-it-yourself maintenance Vehicles with discharge headlight Turn the bulb base counterclock- STEP wise. Unplug connector while STEP depressing the lock release. ITY43C041 Replace the light bulb, and install STEP the bulb base. Align the 3 tabs on the light bulb with the mounting, and insert.
Page 481 4-3. Do-it-yourself maintenance ■ Fog lights (if equipped) Remove the fender liner bolts, STEP loose the fender liner nut and pull down the fender liner. Fender liner bolts Fender liner nut Unplug connector while STEP depressing the lock release. Turn the light bulb counterclock- STEP wise.
Page 482 4-3. Do-it-yourself maintenance Turn and secure the light bulb. STEP Install the bulb base. STEP Shake the bulb base gently to check that it is not loose, turn the fog lights on once and visually confirm that no light is leaking through the mounting.
Page 483 4-3. Do-it-yourself maintenance ■ Front position light (vehicles with halogen headlight) Turn the bulb base counterclock- STEP wise. ITY43C046 Remove the light bulb. STEP ITY43C047 When installing, reverse the steps listed. STEP...
Page 484 4-3. Do-it-yourself maintenance ■ Front turn signal lights Vehicles with halogen headlight For the left side only: Remove STEP the securing bolt and move the washer fluid filler opening. ITY43C012 Turn the bulb base counterclock- STEP wise. ITY43C044 Remove the light bulb. STEP ITY43C045 When installing, reverse the steps listed.
Page 485 4-3. Do-it-yourself maintenance Vehicles with discharge headlight For the left side only: Remove STEP the securing bolt and move the washer fluid filler opening. ITY43C012 Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP When installing, reverse the steps listed. STEP...
Page 486 4-3. Do-it-yourself maintenance ■ Side turn signal lights (front fender type) Push it to the front of the vehicle STEP as shown. ITY43C055 Turn the bulb base counterclock- STEP wise. ITY43C056 Remove the light bulb. STEP ITY43C057 When installing, reverse the steps listed. STEP...
Page 487 4-3. Do-it-yourself maintenance ■ Back-up lights Except vehicles with double back door Open the back door and remove STEP the nuts and lamp assembly. Remove the cover. STEP Unclip the connector wire and STEP turn the bulb bases counter- clockwise.
Page 488 4-3. Do-it-yourself maintenance Remove the light bulb. STEP ITY43C054 When installing, reverse the steps listed. STEP...
Page 489 4-3. Do-it-yourself maintenance Vehicles with double back door Remove the under cover bolt STEP and pull down the under cover. Turn the bulb base counterclock- STEP wise. Remove the light bulb. STEP When installing, reverse the steps listed. STEP...
Page 490 4-3. Do-it-yourself maintenance ■ Rear turn signal lights (except vehicles with double back door) Open the back door and remove STEP the bolts and lamp assembly. Use a cloth to prevent scratches. Unclip the connector wire. STEP Turn the bulb bases counter- STEP clockwise.
Page 491 4-3. Do-it-yourself maintenance Remove the light bulb. STEP When installing, reverse the steps listed. STEP...
Page 492 4-3. Do-it-yourself maintenance ■ Stop/tail and rear turn signal lights (vehicles with double back door) Open the back door and remove STEP the bolts. Close the back door half way STEP and remove the lamp assembly. Unplug connector while STEP pushing the lock release.
Page 493 4-3. Do-it-yourself maintenance Rear turn signal light only: Unclip STEP the connector wire. Turn the bulb bases counter- STEP clockwise. Rear turn signal light Stop/tail light Remove the light bulb. STEP Rear turn signal light Stop/tail light When installing, reverse the steps listed. STEP...
Page 494 4-3. Do-it-yourself maintenance ■ License plate lights Vehicles with lift-up back door Open the back door and remove STEP the license plate light unit. Turn the bulb base counterclock- STEP wise. ITY43C067 Remove the light bulb. STEP ITY43C068 When installing, reverse the steps listed. STEP...
Page 495 4-3. Do-it-yourself maintenance Vehicles with double back door Remove the screw and the STEP license plate light unit. Turn the bulb base counterclock- STEP wise. ITY43C103 Remove the light bulb. STEP When installing, reverse the steps listed. STEP...
Page 496 Water has built up inside the headlight. ■ LED lights The stop/tail, tail lights and high mounted stoplight consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
Page 497 4-3. Do-it-yourself maintenance CAUTION ■ Replacing light bulbs ● Turn off the headlights. Do not attempt to replace the bulb immediately after turning off the headlights. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands. Hold the bulb by the plastic or metal portion.
Page 498 4-3. Do-it-yourself maintenance CAUTION ■ Discharge headlights ● Contact your Toyota dealer before replacing high-intensity discharge headlights (including light bulbs). ● Do not touch the high-intensity discharge headlight’s high voltage socket when the headlights are turned on. An extremely high voltage of 30000 V will be discharged and could result in serious injury or death by electric shock.
Page 499 4-3. Do-it-yourself maintenance...
Page 500 When trouble arises 5-1. Essential information 5-2. Steps to take in an emergency Emergency flashers..500 If a warning light turns on If your vehicle needs to or a warning buzzer be towed ......501 sounds......509 If you think something If a warning message is wrong ......
Page 501 5-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again.
Page 502 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 503 5-1. Essential information Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using a cable or chain secured to the towing hook(s). This should only be attempted on hard, surfaced roads for short distances at low speeds.
Page 504 5-1. Essential information CAUTION ■ While towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing hook and the cables or chains. Always be cautious of the surroundings and other vehicles while towing. ●...
Page 505 5-1. Essential information Towing with a sling-type truck NOTICE ■ To prevent body damage Do not tow with a sling-type truck, either from the front or rear. Towing with a wheel lift-type truck From front Use a towing dolly under the rear wheels.
Page 506 5-1. Essential information From rear Use a towing dolly under the front wheels. NOTICE ■ To prevent causing serious damage to the transmission Never tow this vehicle wheels on the ground. ■ To prevent damaging the vehicle ● Vehicles without a smart entry & start system: Do not tow the vehicle with the key removed or in the “LOCK”...
Page 507 5-1. Essential information Using a flat bed truck If your Toyota is transported by a flat bed truck, it should be tied down at the locations shown in the illustration. When attaching the hooks to the rear of the vehi- cle, make sure to attach them to the inside of the vehicle.
Page 508 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 509 5-1. Essential information Fuel pump shut off system (gasoline engine only) To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 510 Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Charging system warning light...
Page 511 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: •...
Page 512 5-2. Steps to take in an emergency Warning light Warning light/Details Automatic transmission fluid temperature warning light (vehicles with non-Optitron type meters) Indicates: • Automatic transmission fluid temperature is too high if the light comes on. (Comes on or Stop the vehicle in a safe place, shift the shift lever to P flashes) and wait until the light goes off.
Page 513 15.0 L (4.0 gal., 3.3 Imp. gal.) or less. (vehicles without sub fuel tank) Indicates a malfunction in the fuel tank system if the Have the system checked light flashes. (vehicles with by your Toyota dealer. diesel engine)
Page 514 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Driver’s seat belt reminder light (warning buzzer) Fasten the seat belt. Warns the driver to fasten his/her seat belt. (On the center panel without Front passenger’s seat navigation belt reminder light system)
Page 515 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Unengaged “Park” warn- ing light Shift four-wheel drive con- Indicates that the trans- trol to “H4” or “L4”. mission “Park” mecha- (→P. 269) nism is not engaged. Master warning light (If equipped) A buzzer sounds and the...
Page 516 5-2. Steps to take in an emergency Follow the correction procedures. (smart entry & start system warning light and buzzer) After taking the specified steps to correct the suspected problem, check that the warning light turns off. Interior Exterior Correction Warning light Warning light/Details buzzer...
Page 517 5-2. Steps to take in an emergency Interior Exterior Correction Warning light Warning light/Details buzzer buzzer procedure Smart entry & start system warning light (vehicles with non- Turn the “ENGINE Optitron type meters) Indicates that the START driver’s door has been STOP”...
Page 518 If the fuel tank is empty, refuel the vehicle immediately. The malfunction indicator lamp will go off after several trips. If the malfunction indicator lamp does not go off, contact your Toyota dealer as soon as possible. ■...
Page 519 Multi-information display If any of the warning messages is shown again after its correction procedure has been performed, contact your Toyota dealer. ∗ : If equipped...
Page 520 Have the vehicle inspected immediately. Failure to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning message Details Indicates a malfunction in the automatic transmission system A buzzer also sounds.
Page 521 5-2. Steps to take in an emergency Warning message Details Indicates a malfunction in the pre-crash safety system A buzzer also sounds. (If equipped) Indicates a malfunction in the parking assist- sensor The site of malfunction is shown flashing on the display.
Page 522 5-2. Steps to take in an emergency Warning message Details Indicates a malfunction in the fuel system A buzzer also sounds. (Diesel engine) Indicates a malfunction in the VGRS A buzzer also sounds. (If equipped) Indicates a malfunction in the fuel tank system A buzzer also sounds.
Page 523 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning message goes off. Warning message Details Correction procedure Indicates that one or more of the doors is not fully closed The system also indi- cates which doors are...
Page 524 If the light goes off, is too high you may start the vehi- A buzzer also sounds. cle again. If the light (If equipped) does not go off, con- tact your Toyota dealer.
Page 525 5-2. Steps to take in an emergency Warning message Details Correction procedure Check the level of engine oil, and add if necessary. This message may Indicates that engine appear if the vehicle is oil level is low stopped on a slope. A buzzer also sounds.
Page 526 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the pre- crash safety system is not currently func- • Check the grille and the tional because the sensor and clean them grille or the sensor is if they are dirty.
Page 527 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the dynamic radar cruise Clean the sensor. control sensor is dirty or covered with ice (If equipped) • Switch driving mode to Indicates that the either normal or power. dynamic radar cruise •...
Page 528 5-2. Steps to take in an emergency Have the malfunction repaired immediately. After taking the specified steps to correct the suspected problem, check that the warning message and light go off. Interior Exterior Correction Warning message Details buzzer buzzer procedure The electronic key was carried out- side the vehicle...
Page 529 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure An attempt was made to start the engine without the electronic key being present, or Start the the electronic key engine with  Once was not function- the elec- ing normally.
Page 530 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure The driver’s door was opened when the shift lever was Shift the Contin-  not in “P” and the shift lever uous “ENGINE START to “P”.
Page 531 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure • When the doors were unlocked with the mechanical key and then the “ENGINE START Touch the STOP” switch was electronic pressed, the elec- key to the tronic key could “ENGINE...
Page 532 5-2. Steps to take in an emergency Interior Exterior Correction Warning message Details buzzer buzzer procedure A door was opened and closed Press the with the “ENGINE “ENGINE START STOP” START switch turned off STOP” and then the  Once switch “ENGINE START while...
Page 533 5-2. Steps to take in an emergency Other messages If the following message is displayed, take appropriate action and confirm that the message has disappeared. (→P. 274) Message Correction procedure Select the four-wheel drive control switch in L4 and shift the shift lever to “D” or “R”. Confirm the operating conditions.
Page 534 5-2. Steps to take in an emergency ■ Warning message in vehicle-to-vehicle distance control mode of the dynamic radar cruise control (if equipped) In the following cases, the warning message may not be displayed even if vehicle-to-vehicle distance decreases: ● When your vehicle and the vehicle ahead are traveling at the same speed or the vehicle ahead is traveling more quickly than your vehicle ●...
Page 535 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ●...
Page 536 5-2. Steps to take in an emergency Double back door type Tool bag Jack Spare tire...
Page 537 5-2. Steps to take in an emergency Taking out the jack (lift-up back door type) Remove the cover. STEP Unhook the rubber band and STEP take out the jack. Loosen Tighten Loosen and remove the jack.
Page 538 5-2. Steps to take in an emergency Taking out the tool box (lift-up back door type) Remove the cover. STEP Take out the tool box. STEP...
Page 539 5-2. Steps to take in an emergency Taking out the jack and tool bag (double back door type) Remove the cover. STEP Unhook the strap and remove STEP the tool bag. Loosen and remove the jack. STEP Loosen Tighten...
Page 540 5-2. Steps to take in an emergency Taking out the spare tire Assembling the jack handle. STEP Remove the jack handle and the jack extension bar from the tool box and assemble by following these steps. Loosen the screw using a screwdriver.
Page 541 5-2. Steps to take in an emergency Insert the jack handle extension STEP into the lowering screw. Lower Raise Lower the spare tire completely STEP to the ground. Pull out the spare tire and STEP remove the holding bracket.
Page 542 5-2. Steps to take in an emergency Replacing a flat tire Chock the tires. STEP STEP Flat tire Wheel chock positions Left-hand side Behind the rear right-hand side tire Front Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Rear Right-hand side...
Page 543 5-2. Steps to take in an emergency Pry off the wheel ornament, STEP using the beveled end of the wheel ornament remover as shown. Slightly loosen the wheel nuts STEP (one turn).
Page 544 5-2. Steps to take in an emergency Assembling the jack handle. STEP Remove the jack handle, jack extension bar and jack handle bar from the tool box and assemble by following these steps. Loosen the bolts and the screw using either the jack handle or a screwdriver.
Page 545 5-2. Steps to take in an emergency Position the jack at the jack STEP points as shown. Front - Under the chassis frame side rail Rear - Under the rear axle hous- Raise the vehicle until the tire is STEP slightly raised off the ground.
Page 546 5-2. Steps to take in an emergency Installing the spare tire Remove any dirt or foreign mat- STEP ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 547 5-2. Steps to take in an emergency Lower the vehicle. STEP Firmly tighten each nut two or STEP three times in the order shown in the illustration. Tightening torque Aluminum wheels: 131 N•m (13.4 kgf•m, 97 ft•lbf) Steel wheels: 209 N•m (21.3 kgf•m, 154 ft•lbf) Reinstall the wheel ornament.
Page 548 5-2. Steps to take in an emergency Stowing the flat/spare tire, jack and tools Lay down the tire with the outer STEP side facing up, and install the holding bracket. Raise the tire. STEP Vehicles with kinetic dynamic suspension: Pull the tire towards the rear of the vehicle when raising.
Page 549 5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or install- ing and removing tire chains.
Page 550 • If there are any cracks or deformations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. • Do not attach a heavily damaged wheel ornament, as it may fly off the wheel while the vehicle is moving.
Page 551 5-2. Steps to take in an emergency NOTICE ■ Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.
Page 552 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (→P. 193) or releasing the steering lock (→P. 195), confirm the following points. ■ The engine will not start even when the starter motor oper- ates normally One of the following may be the cause of the problem.
Page 553 ● The battery may be discharged. (→P. 558) ● There may be a malfunction in the steering lock system. Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown. Emergency start function (vehicles with a smart entry & start...
Page 554 (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 555 5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. For vehicles with the smart entry & start system, bring the other key and the key number stamped on the key number plate. For vehicles without the smart entry &...
Page 556 (→P. 32) in order to perform the following operations. Locks all doors Closes windows/moon roof (turn and hold) Unlocks all doors Opens windows/moon roof (turn and hold) : If equipped : This setting must be custom- ized at your Toyota dealer. ∗ : If equipped...
Page 557 5-2. Steps to take in an emergency Starting the engine Shift the shift lever to “P” and apply the brakes. STEP Touch the Toyota emblem side of STEP electronic “ENGINE START STOP” switch. An alarm will sound to indicate that the start function cannot detect the electronic key that is touched to the “ENGINE START...
Page 558 5-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to “P” and press the “ENGINE START STOP” switch as you normally do when stopping the engine. ■ Replacing the key battery As this above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery depletes.
Page 559 You can also call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below.
Page 560 IGNITION ON mode (vehicles with a smart entry & start system). Once the vehicle’s engine has started, remove the jumper STEP cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible.
Page 561 5-2. Steps to take in an emergency ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting. ■ Avoiding a discharged battery ● Turn off the headlights and the audio system while the engine is turned off.
Page 562 5-2. Steps to take in an emergency CAUTION ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery. ● Make sure the jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any part other than the intended termi- nal.
Page 563 5-2. Steps to take in an emergency NOTICE ■ When handling jumper cables Be careful that the jumper cables do not become tangled in the cooling fan or any of the belts when connecting or disconnecting them.
Page 564: If Your Vehicle Overheats
If you do not see steam: Carefully lift the hood. After the engine has cooled STEP down sufficiently, inspect the hoses and radiator core (radi- ator) for any leaks. Radiator Cooling fans If a large amount of coolant leaks, immediately contact your Toyota dealer.
Page 565 5-2. Steps to take in an emergency The coolant level is satisfac- STEP tory if it is between the “FULL” or “F” and “LOW” or “L” lines on the reservoir. (→P. 435) Reservoir “FULL” or “F” “LOW” or “L” Radiator (gasoline engine only) Gasoline engine...
Page 566 (The fan may not operate in freezing temperatures.) If the fan is not operating: STEP Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
Page 567 5-2. Steps to take in an emergency CAUTION ■ To prevent an accident or injury when inspecting under the hood of your vehicle ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot, caus- ing serious injury such as burns.
Page 568 If the engine does not start after the above steps have been per- formed, wait for 10 seconds and try step 2 and 3 again. If the engine still does not start, contact your Toyota dealer. After starting the engine, depress the accelerator pedal lightly until the engine runs smoothly.
Page 569: If The Vehicle Becomes Stuck
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the engine. Set the parking brake and put the shift STEP lever to “P”.
Page 570 5-2. Steps to take in an emergency CAUTION ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the sur- rounding area is clear, to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free.
Page 571: Stopped In An Emergency
5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: Steadily step on the brake pedal with both feet and firmly STEP...
Page 572 5-2. Steps to take in an emergency Vehicles with a smart entry & STEP start system: To stop the engine, press and hold the “ENGINE START STOP” switch for 2 consecutive sec- onds or more, or press it Press and hold for 2 seconds or more, briefly 3 times or more in suc- or press briefly 3 times or more cession.
Page 573 5-2. Steps to take in an emergency...
Page 574 Vehicle specifications 6-1. Specifications Maintenance data (fuel, oil level, etc.)..574 Fuel information ....591 6-2. Customization Customizable features ..593 6-3. Initialization Items to initialize ....602...
Page 575 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions Overall length 4990 mm (196.5 in.) Overall width 1970 mm (77.6 in.) 1905 mm (75.0 in.) Overall height 1945 mm (76.6 in.) Wheelbase 2850 mm (112.2 in.) Front 1640 mm (64.6 in.) Tread Rear 1635 mm (64.4 in.)
Page 576 The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel or on the front right frame.
Page 577 6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 1UR-FE engine 1VD-FTV engine...
Page 578 6-1. Specifications Engine Gasoline engine Model 1UR-FE Type 8-cylinder V type, 4-cycle, gasoline Bore and stroke 94.0 x 83.0 mm (3.70 x 3.27 in.) Displacement 4608 cm (281.1 cu.in.) Valve clearance Automatic adjustment (engine cold) Drive belt tension Automatic adjustment Diesel engine Model 1VD-FTV...
Page 579 6-1. Specifications Fuel Gasoline engine Fuel type Unleaded gasoline only Research octane 91 or higher number Fuel tank capacity 138 L (36.4 gal., 30.3 Imp.gal.) (Reference) Diesel engine Fuel type Diesel fuel only Cetane number 48 or higher Vehicles with sub fuel tank 138 L (36.4 gal., 30.3 Imp.gal.) Fuel tank...
Page 580 Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick. ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Gasoline engine...
Page 581 6-1. Specifications Recommended viscosity (SAE): If you use SAE 10W-30 or a higher viscosity engine oil in extremely low temperatures, the engine may become difficult to start, so SAE 5W-30 or lower vis- cosity engine recom- Temperature range anticipated before mended.
Page 582 6-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil containers to help you select the oil you should use. API Service Symbol Top portion: The oil quality desig- nation by API (American Petro- leum Institute) (SN) Center portion: The SAE viscosity grade (SAE 0W-20)
Page 583 6-1. Specifications Diesel engine Oil grade: G-DLD-1, API CF-4, CF or ACEA B1 Recommended viscosity (SAE): SAE 5W-30 is the best choice for good fuel economy and good Preferred starting in cold weather. If you use SAE 10W-30 or a higher viscosity engine oil in extremely low temperatures, the engine may become difficult to...
Page 584 6-1. Specifications DLD logo mark: The Global DLD-1 logo mark, attached on some oil containers to help in selecting the oil you should use, indicates that the oil meets the guidelines recom- mended by the following associ- ations: ● ACEA (Association des Con- structeurs Europeens d’Auto- mobiles) ●...
Page 585 17.6 L (18.6 qt., 15.5 Imp.qt.) engine Without rear heater 14.8 L (15.6 qt., 13.0 Imp.qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 586 Toyota Genuine Differential Gear Oil LT Oil type and viscosity 75W-85 or equivalent Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please contact your Toyota...
Page 587 Recommended oil viscosity SAE 75W : Your Toyota vehicle is filled with “Toyota Genuine Transfer Gear oil LF” at the factory. Use Toyota approved “Toyota Genuine Transfer Gear oil LF” or an equivalent of matching quality to satisfy the above specification. Please con-...
Page 588 6-1. Specifications Brakes Pedal clearance 93 mm (3.7 in.) Min. 1  6 mm (0.04  0.24 in.) Pedal free play 5  7 clicks Parking brake lever travel Fluid type SAE J1703 or FMVSS No. 116 DOT 3 : Minimum pedal clearance when depressed with a force of 490 N (50 kgf, 110 lbf) while the engine is running : Parking brake lever travel when pulled up with a force of 200 N (20.4 kgf, 45.0 lbf)
Page 589 6-1. Specifications Tires and wheels Tire size 285/60R18 116V, 285/65R17 116H Front wheel Rear wheel Tire inflation pressure kPa (kgf/cm kPa (kgf/cm (Recommended cold tire or bar, psi) or bar, psi) inflation pressure) 230 (2.3, 33) 230 (2.3, 33) 18 × 8 J, 17 × 8 J Wheel size Aluminum wheels Steel wheels...
Page 590 6-1. Specifications Light bulbs Light Bulbs Type Headlights Low beam (Halogen bulbs Low beam (Discharge bulbs High beam Front turn signal lights Front position lights Fog lights Side turn signal lights Exterior (Front fender type) Rear turn signal lights (Lift-up back door) Rear turn signal lights (Double back door) Back-up lights...
Page 591 6-1. Specifications Light Bulbs Type Front interior light Rear interior lights With rear personal lights Without rear personal lights Front personal lights Interior Rear personal lights Vanity lights Door courtesy lights Glove box light A: H11 halogen bulbs B: HB3 halogen bulbs C: D4S high-intensity discharge D: Wedge base bulbs E: Single end bulbs...
Page 592: Fuel Information
■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■ If you plan to drive in foreign countries Low sulfur diesel fuel may not be available, so please confirm the availability with your distributor.
Page 593 The use of fuel with more than 5 % FAME content (B5) will damage the vehi- cle’s fuel system. You must ensure that refueling is carried out only from a source where fuel specification and quality can be guaranteed. In case of any doubt, ask your Toyota dealer.
Page 594: Customization Customizable Features
Customizable features Your vehicle includes a variety of electronic features that can be per- sonalized to your preferences. Programming of these preferences can be performed by your Toyota dealer. For vehicles with the navigation system, it is also possible to cus- tomize certain vehicle features yourself using the touch screen.
Page 595 6-2. Customization Customizable features Vehicle customization settings can be changed at your Toyota dealer. For vehicles with the navigation system, some settings can be changed using the touch screen. Settings that can be changed using the touch screen Settings that can be changed using the vehicle switches Settings that can be changed by your Toyota dealer Definition of symbols: O= Available, —...
Page 596 6-2. Customization Default Customized Item Function setting setting Wireless remote — — O control Open door warn- ing function — — O (when locking the vehicle) Driver’s door Wireless unlocked in remote All doors Unlocking opera- one step, all control unlocked in O —...
Page 597 6-2. Customization Default Customized Item Function setting setting Driver’s door unlocked in All doors Door lock Unlocking using a one step, all unlocked in O — O (→P. 50) doors one step unlocked in two steps Push and One short Switch operation —...
Page 598 6-2. Customization Default Customized Item Function setting setting Mechanical key linked operation — — O (open) Mechanical key linked operation — — O (close) Linked operation of components Slide only Tilt only — — O when door key is used Wireless remote control linked Moon roof...
Page 599 6-2. Customization Default Customized Item Function setting setting Time period before the interior 15 seconds 7.5 seconds O — O lights turn off 30 seconds Operation after the “ENGINE START STOP” — — O switch is turned Operation when the doors are —...
Page 600 — — O (→P. 224) lights automati- cally turn on Detection dis- tance of the rear Near O — O center sensor Toyota park- Alert Volume ing assist- (alert volume can 1 to 5 O — O sensor be adjusted) (→P. 258)
Page 601 6-2. Customization : VDJ200R-GNTEZQ and URJ202R-GNTEKQ only. The model code is indicated on the manufacturer’s label. (→P. 575) : The settings can be changed when the mechanical key linked operation of the power window is set to ON. : The settings can be changed when the wireless remote control linked oper- ation of the power window is set to ON.
Page 602 6-2. Customization CAUTION ■ During customization As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.
Page 603: Initialization Items To Initialize
6-3. Initialization Items to initialize The following item must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference • After reconnecting or chang- ing the battery with power Power back door back door opened...
Page 604: Index
What to do if......614 For vehicles with a navigation system, refer to the “Navigation System Owner’s Manual” for information regard- ing the equipment listed below. • Navigation system • Air conditioning • Audio/video system • Toyota parking assist monitor...
Page 605: Abbreviation List
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Four Wheel Drive Air conditioning Anti-lock Brake System AI-SHIFT Artificial Intelligence Shift control Automatic Locking Retractor Child Restraint System DISP Display Electronic Controlled Transmission Emergency Locking Retractor Intermittent KDSS Kinetic Dynamic Suspension System Light Emitting Diode Power RSCA Roll Sensing of Curtain Shield Airbag...
Page 606: Alphabetical Index
Alphabetical index Alphabetical index Automatic transmission Air conditioning filter....452 Automatic transmission..198 Automatic air conditioning ... 353 If the shift lever cannot be ABS ........... 311 shifted from “P”....553 Active traction control..... 311 “S” mode ....... 201 Air conditioning filter ....452 Automatic light control Air conditioning system system........
Page 607 Shift position and shift Airbag precautions ....145 range ........198 Battery precautions ..439, 561 Trip information..... 220 Child-protectors.......52 Toyota parking assist-sensor Child restraint system ... 152 display ........ 258 How your child should wear Warning message....518 the seat belt ......99 Do-it-yourself maintenance ..
Page 608 Alphabetical index Winter driving tips ....330 Engine Compartment ......427 Driving position memory system .......85 Engine switch......193 Hood ........426 How to start the engine..193 Eco driving ....... 179 Identification number .... 575 Electronic key If the engine will not start ..551 If your electronic key battery If you run out of fuel and is discharged ....
Page 609 Alphabetical index Fog lights Gas station information ..620 Gauges ........207 Replacing light bulbs..... 472 Switch ........228 Glove box ......... 380 Wattage......... 589 Glove box light......380 Four-wheel drive system..269 Front fog lights Hazard lights Replacing light bulbs..... 472 Switch ........
Page 610 Alphabetical index Illuminated entry system..378 License plate lights Replacing light bulbs..... 472 Indicator lights ......213 Inside rear view mirror .... 108 Wattage ........ 589 Instrument cluster light Light bulbs control ........209 Replacing......472 Wattage ........ 589 Intercooler ........ 437 Interior lights Lights Interior lights ......
Page 611 Alphabetical index Navigation system Replacing Key battery......455 Fuses ........459 Odometer........207 Light bulbs ......472 Off road precautions ....324 Tires........534 Roll sensing of curtain shield Engine oil ......430 airbags off switch....150 Opener Fuel filler door ....... 124 Hood ........
Page 612 Alphabetical index Shift lever Switch Automatic transmission..198 DISP switch ......220 If the shift lever cannot ECT switch......200 be shifted from “P” ....553 Emergency flasher switch..500 Side airbags ......137 Engine switch......193 Side mirror Fog light switch ..... 228 Adjusting and folding.....
Page 613 Towing Brake system ......509 Emergency towing ....502 Charging system....509 Trailer towing ......334 Cruise control Toyota parking assist monitor indicator light ...... 510 Toyota parking Engine oil level...... 512 assist-sensor ......258 Fuel system ......510 Traction control ....... 311 Fuel level ......
Page 614 Alphabetical index Washing and waxing ....414 Wheels ........450 Window glasses ...... 115 Window lock switch....116 Windows Power windows ..... 115 Rear window defogger ..373 Washer......229, 237 Windshield wipers ....229 Wireless remote control key Replacing the battery .... 455 Wireless remote control key..
Page 615 What to do if... What to do if... If you have a flat tire A tire punctures P. 534 If the engine will not start P. 551 If you run out of fuel and the P. 567 engine stalls The engine does not start P.
Page 616 What to do if... The warning light or indicator If a warning light turns on P. 509 light comes on Vehicles with non-Optitron type meters Vehicles with Optitron type meters...
Page 617: Warning Lights
What to do if... ■Warning lights Brake system warning Open door warning light light P. 509 P. 512 Charging system warn- Low fuel level warning ing light light P. 509 P. 512 Automatic transmis- Driver’s seat belt sion fluid temperature reminder light warning light P.
Page 618 What to do if...
Page 619 What to do if...
Page 620 What to do if...
Page 621: Gas Station Information
GAS STATION INFORMATION Fuel filler door Auxiliary catch lever P. 124 P. 426 Tire inflation pressure Fuel filler door opener Hood lock release lever P. 588 P. 124 P. 426 Vehicles with sub fuel tank 138 L (36.4 gal.,30.3 Imp.gal.) Fuel tank system capacity...

Toyota Land Cruiser Owner's Manual

1 Before Driving

1-1. Key Information

1-2. Opening, Closing and Locking the Doors

Adjustable Components (Seats, Mirrors, Steering Wheel) Front Seats

1-4. Opening and Closing the Windows and Moon Roof

1-6. Theft Deterrent System

1-7. Safety Information

2 When Driving

Driving Procedures Driving the Vehicle

Instrument Cluster Gauges and Meters

2-3. Operating the Lights and Wipers

Quick Links

Related Manuals for Toyota Land Cruiser

Summary of Contents for Toyota Land Cruiser

Table of Contents