Toyota LAND CRUISER Service Manual Supplement page 194

TR-36 TRANSFER - COMPONENT PARTS (REAR EXTENSION HOUSING ASSEMBLY)
(b) Using a screwdriver and hammer, remove the rear output
shaft dust deflector.
12. REMOVE OIL SEAL
Using a screwdriver, pry out the oil seal.
13. REMOVE BALL BEARING
(a) Using a screwdriver, remove the snap ring.
(b) Using SST and a press, remove the ball bearing.
SST 09316-60010 (09316-00010, 09316-00020)
INSPECTION OF OIL PUMP
1. CHECK BODY CLEARANCE OF DRIVEN ROTOR
Install the drive rotor to the driven rotor.
Using a feeler gauge, measure body clearance between
drive rotor and extension housing.
Standard body clearance:
Maximum body clearance: 0.17 mm (0.0067 in.)
0.08 — 0.17 mm
(0.0031 - 0.0067 in.)