Toyota LAND CRUISER Service Manual Supplement page 183
Hide thumbs
Also See for LAND CRUISER:
- Owner's manual (623 pages) ,
- Repair manual (19 pages) ,
- Owner's manual (576 pages)
Table of Contents
Advertisement
TRANSFER - COMPONENT PARTS (CENTER DIFFERENTIAL ASSEMBLY)
7.
INSTALL REAR TAPER ROLLER BEARING
Using a press, install the rear taper roller bearing.
8.
INSTALL SHIFTING KEY RETAINER
Using a plastic hammer, tap in the shifting key retainer.
9.
INSERT CLUTCH HUB INTO HIGH AND LOW CLUTCH
SLEEVE
(a)
Install the clutch hub and shifting keys to the high and
low clutch sleeve.
(b)
Install the shifting key springs.
NOTICE:
Install the key springs positioned so that their
end gaps are not in line.
10. INSTALL HIGH AND LOW CLUTCH SLEEVE ASSEMBLY
AND HIGH SPEED OUTPUT GEAR BUSHING
(a)
Apply MP grease to the straight pin.
(b)
Install the two straight pins.
(c)
Using SST and a press, install the clutch sleeve assembly
and high speed output gear bushing.
SST 09316-60010 (09316-00010)
NOTICE: Before pressing, align the holes on the bushing
and shaft so that the pin on the shaft aligned with the
cutting portion of the bushing.
TR-25
Advertisement
Table of Contents
Troubleshooting
