Toyota LAND CRUISER Service Manual Supplement page 61
Hide thumbs
Also See for LAND CRUISER:
- Owner's manual (623 pages) ,
- Repair manual (19 pages) ,
- Owner's manual (576 pages)
Table of Contents
Advertisement
MT-32
MANUAL TRANSMISSION (STATION WAGON) - OUTPUT SHAFT
(c)
Using SST and a press, remove the hub sleeve No.2 as-
sembly, synchronizer ring and third gear.
H15OF — Single Synchronizer ring
H151F — Triple Synchronizer rings
SST 09555-55010
(d)
Remove the needle roller bearing.
7.
REMOVE HUB SLEEVE NO.2, SHIFTING KEYS AND
SPRINGS FROM CLUTCH HUB NO.2
Using a screwdriver, remove the three shifting keys and
two springs from the clutch hub No.2.
8.
REMOVE HUB SLEEVE NO.3 ASSEMBLY, SYNCHRO-
NIZER RING, FIFTH GEAR AND NEEDLE ROLLER BEAR-
ING
(a)
Using two screwdriver, and a hammer, drive out the snap
ring.
(b)
Using SST and a press, remove the hub sleeve No.3 as-
sembly and synchronizer ring.
SST 09950-00020
(c)
Remove the needle roller bearing.
9.
REMOVE HUB SLEEVE NO.3 SHIFTING KEYS AND
SPRINGS FROM CLUTCH HUB NO.3
Using a screwdriver, remove the three shifting keys and
two springs from the clutch hub No.3.
Advertisement
Table of Contents
Troubleshooting
