TR-18
TRANSFER - COMPONENT PARTS (IDLER GEAR ASSEMBLY)
2.
INSTALL HIGH AND LOW CLUTCH SLEEVE
3.
INSTALL NEEDLE ROLLER BEARING AND IDLER LOW
GEAR
(a)
Apply gear oil to the needle roller bearing.
(b)
Install the needle roller bearing and idler low gear.
4.
INSTALL REAR TAPER ROLLER BEARING
Using SST and a press, install the rear taper roller bear-
ing.
SST 09316-60010 (09316-00010, 09316-00070)
5.
MEASURE OIL CLEARANCE AND THRUST CLEARANCE
OF IDLE LOW GEAR
(a) Using a feeler gauge, measure the idler low gear thrust
clearance.
Standard clearance:
Maximum clearance: 0.275 mm (0.0108 in.)
(b) Using a dial indicator, measure the idler low gear oil clear-
ance.
Standard clearance:
Maximum clearance: 0.068 mm (0.0027 in.)
0.125 — 0.275 mm
(0.0049 - 0.0108 in.)
0.015 — 0.068 mm
(0.0006 - 0.0027 in.)