AUTOMATIC TRANSMISSION (STATION WAGON)
AT-74
(0
(1FZ-FE)
Remove the nut and disconnect the connectors from the
starter.
(d)
(1FZ-FE)
Remove the two bolts and the starter.
(e)
Disconnect the neutral start switch connectors.
(f)
Remove the bolt and disconnect the oil cooler tube clamp
from the converter housing.
(g)
Disconnect the connectors from the transfer.
(h)
Remove the clamp and disconnect the wire harness from
the transmission and transfer.
(i)
Remove the two bolts and disconnect the exhaust pipe
bracket from the converter housing.
(j)
(1HD-T)
Remove the four bolts and the stiffener plate.
(k)
(1HD-T)
Remove the nut and disconnect the connectors from the
starter.
(I)
(1HD-T)
Remove the nut and the starter.
ASSEMBLY REMOVAL
AND INSTALLATION